diff --git a/files/setup_aquar.sh b/files/setup_aquar.sh
index 226b1c0..6cd0cac 100644
--- a/files/setup_aquar.sh
+++ b/files/setup_aquar.sh
@@ -25,22 +25,22 @@ fi
 echo '********安装python3及venv********'
 apt install curl -y
 apt install python3-pip -y
-pip3 install virtualenv
-pip3 install virtualenvwrapper
-if ! grep -q '##\[aquar config start\]##' /root/.bashrc;
-then
-cp /root/.bashrc /root/.bashrc.bak
-cat >> /root/.bashrc <<EOF
-##[aquar config start]##
-export WORKON_HOME=$HOME/.virtualenvs
-export VIRTUALENVWRAPPER_PYTHON=/usr/bin/python3
-source /usr/local/bin/virtualenvwrapper.sh
-##[aquar config end]##
-EOF
-else
-    echo '********探测到已配置成功，跳过/root/.bashrc的配置********'
-fi
-source /root/.bashrc
+# pip3 install virtualenv
+# pip3 install virtualenvwrapper
+# if ! grep -q '##\[aquar config start\]##' /root/.bashrc;
+# then
+# cp /root/.bashrc /root/.bashrc.bak
+# cat >> /root/.bashrc <<EOF
+# ##[aquar config start]##
+# export WORKON_HOME=$HOME/.virtualenvs
+# export VIRTUALENVWRAPPER_PYTHON=/usr/bin/python3
+# # source /usr/local/bin/virtualenvwrapper.sh
+# ##[aquar config end]##
+# EOF
+# else
+#     echo '********探测到已配置成功，跳过/root/.bashrc的配置********'
+# fi
+# source /root/.bashrc
 cat > /usr/local/bin/aqserv <<EOF
 #!/bin/bash
 cmd=\$1
@@ -49,21 +49,19 @@ if [ "\$cmd" != "start" ] && [ "\$cmd" != "stop" ] && [ "\$cmd" != "restart" ] &
     exit 0
 fi
 source /root/.bashrc
-source /usr/local/bin/virtualenvwrapper.sh
-workon aquar
 cd /opt/aquar/src/docker-compose/
 if [ "\$cmd" == "start" ]; then
     echo "aquar docker services starting"
-    docker-compose up -d
+    docker compose up -d
 elif [ "\$cmd" == "stop" ]; then
     echo "aquar docker services stoping"
-    docker-compose stop
+    docker compose stop
 elif [ "\$cmd" == "restart" ]; then
     echo "aquar docker services restarting"
-    docker-compose restart
+    docker compose restart
 
 else
-    docker-compose ps
+    docker compose ps
 fi
 EOF
 chmod +x /usr/local/bin/aqserv
@@ -76,20 +74,20 @@ $(lsb_release -cs) \
 stable"
 apt-get update
 apt-get install docker-ce docker-ce-cli containerd.io -y
-
-echo '********创建python环境aquar并安装docker-compose********'
-source /root/.bashrc
-source /usr/local/bin/virtualenvwrapper.sh
-if ! grep -q 'source /usr/local/bin/virtualenvwrapper.sh' /root/.bashrc;
-then
-cat >> /root/.bashrc <<EOF
-source /usr/local/bin/virtualenvwrapper.sh
+apt-get install docker-compose-plugin -y
+# echo '********创建python环境aquar并安装docker-compose********'
+# source /root/.bashrc
+# source /usr/local/bin/virtualenvwrapper.sh
+# if ! grep -q 'source /usr/local/bin/virtualenvwrapper.sh' /root/.bashrc;
+# then
+# cat >> /root/.bashrc <<EOF
+# source /usr/local/bin/virtualenvwrapper.sh
 ##[aquar config end]##
-EOF
-fi
-mkvirtualenv aquar
-workon aquar
-pip install docker-compose
+# EOF
+# fi
+# mkvirtualenv aquar
+# workon aquar
+# pip install docker-compose
 
 echo '********配置docker-compose********'
 mkdir -p /opt/aquar/src/docker-compose/
@@ -98,7 +96,7 @@ cat > /opt/aquar/src/docker-compose/docker-compose.yml <<EOF
 version: "3"
 services:
   nextcloud:
-    image: nextcloud
+    image: nextcloud:22.2.4-apache
     container_name: nextcloud
     volumes:
       # 挂载配置文件
@@ -107,6 +105,11 @@ services:
       - /opt/aquar/storages/apps/nextcloud/config:/var/www/html/config
       - /opt/aquar/storages/apps/nextcloud/data:/var/www/html/data
       - /opt/aquar/storages/aquarpool:/opt/aquarpool
+    environment:
+      - MYSQL_PASSWORD=root
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=root
+      - MYSQL_HOST=mariadb:3306
     ports:
       - "8081:80"
     depends_on:
@@ -208,7 +211,7 @@ services:
       # Permanent storage for settings, index & sidecar files (DON'T REMOVE):
       - "/opt/aquar/storages/apps/photoprism/storage:/photoprism/storage"
   mariadb:
-    image: mariadb:10.9.5
+    image: mariadb:10.5.23
     container_name: mariadb
     volumes:
       - /opt/aquar/storages/apps/mariadb:/var/lib/mysql
@@ -334,6 +337,6 @@ systemctl enable aquar
 
 echo '********启动docker-compose********'
 cd /opt/aquar/src/docker-compose/
-docker-compose up -d
+docker compose up -d
 mkdir -p /opt/aquar/storages/apps/filerun/html/system/data/temp
 # systemctl start aquar
\ No newline at end of file
diff --git a/files/setup_pve.sh b/files/setup_pve.sh
index ef41588..b7b2fc7 100644
--- a/files/setup_pve.sh
+++ b/files/setup_pve.sh
@@ -16,33 +16,34 @@ else
     echo '********探测到已配置成功，跳过/etc/fstab的配置********'
 fi
 apt update
+apt install pve-kernel-6.2
+proxmox-boot-tool kernel list
+proxmox-boot-tool kernel pin 6.2.11-2-pve
 echo '*******配置vmbr1********'
 
-sed -i '/iface vmbr0 inet static/s/static/dhcp/g' /etc/network/interfaces
-sed -i '/address [0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+/d' /etc/network/interfaces
-sed -i '/gateway [0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+/d' /etc/network/interfaces
-if ! grep -q '##\[aquar config start\]##' /etc/network/interfaces;
+if ! grep -q 'vmbr1' /etc/network/interfaces;
 then
     cp /etc/network/interfaces /etc/network/interfaces.bak
+    sed -i '/iface vmbr0 inet static/s/static/dhcp/g' /etc/network/interfaces
+    sed -i '/address [0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+/d' /etc/network/interfaces
+    sed -i '/gateway [0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+/d' /etc/network/interfaces
     cat >> /etc/network/interfaces <<EOF
 
-##[aquar config start]##
 auto vmbr1
 iface vmbr1 inet static
         address 192.168.172.1/24
         bridge-ports none
         bridge-stp off
         bridge-fd 0
-##[aquar config end]##
 EOF
 else
-    echo '********探测到已配置成功，跳过/etc/fstab的配置********'
+    echo '********探测到已配置成功，跳过/etc/network/interfaces的配置********'
 fi
 
 echo '*******安装ipupdater.py脚本********'
-sed '/(^10\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}.+$)|(^172\.1[6-9]\.[0-9]{1,3}\.[0-9]{1,3}.+$)|(^172\.2[0-9]\.[0-9]{1,3}\.[0-9]{1,3}.+$)|(^172\.3[0-1]\.[0-9]{1,3}\.[0-9]{1,3}.+$)|(^192\.168\.[0-9]{1,3}\.[0-9]{1,3}.+$)/s/static/dhcp/g' /etc/hosts
+# sed '/(^10\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}.+$)|(^172\.1[6-9]\.[0-9]{1,3}\.[0-9]{1,3}.+$)|(^172\.2[0-9]\.[0-9]{1,3}\.[0-9]{1,3}.+$)|(^172\.3[0-1]\.[0-9]{1,3}\.[0-9]{1,3}.+$)|(^192\.168\.[0-9]{1,3}\.[0-9]{1,3}.+$)/s/static/dhcp/g' /etc/hosts
 ## 扫描hosts中的内容，取出带有私有地址的那一行，找到后面跟的host名称，赋值到变量，然后带入到下面的脚本中
-pve_host=$(grep -m1 "^:" /tmp/example.log)
+pve_host=$(awk '{print $1}' /etc/hostname)
 
 cat > /root/ipupdater.py <<EOF
 #! /usr/bin/env python
@@ -129,11 +130,11 @@ def updateHosts(ip):
     shutil.copy(HOSTS_PATH, HOSTS_PATH + '.bak')
     targetFile = open(HOSTS_PATH, "r+")
     configText = targetFile.read()
-    splitRes = re.split("\n.+ pve\n", configText)
+    splitRes = re.split("\n.+ ${pve_host}\n", configText)
     print(splitRes)
     prepart = splitRes[0]
     postpart = splitRes[1]
-    updateConfig = "\n%s pve\n" % ip
+    updateConfig = "\n%s ${pve_host}\n" % ip
     print("----host updateConfig----\n %s" % updateConfig)
     newConifg = prepart + updateConfig+ postpart
     print("----host newConifg----\n%s" % newConifg)
@@ -189,14 +190,14 @@ systemctl enable ipupdater.service
 ls -l /dev/disk/by-id/
 # 获取到这个命令的磁盘信息
 
-qm set 101 -scsi2 /dev/disk/by-id/ata-WDC_WD42PURU-78C4CY0_WD-WX42AC29T231
-qm set 101 -scsi3 /dev/disk/by-id/ata-WDC_WD42PURU-78C4CY0_WD-WXD2A13N6NCP
+qm set 101 -scsi2 /dev/disk/by-id/ata-ST4000VX015-3CU104_WW618Q3D
+qm set 101 -scsi3 /dev/disk/by-id/ata-ST4000VX015-3CU104_WW6199F0
 
 # 配置TrueNAS的存储池
 
 
 cp /etc/default/grub /etc/default/grub.bak
-sed -i '/GRUB_CMDLINE_LINUX_DEFAULT/s/quiet/quiet quiet intel_iommu=on video=efifb:off,vesafb:off i915.enable_guc=7/g' /etc/default/grub
+sed -i '/GRUB_CMDLINE_LINUX_DEFAULT/s/quiet/quiet quiet intel_iommu=on iommu=pt video=efifb:off,vesafb:off i915.enable_guc=7/g' /etc/default/grub
 
 cat > /etc/modules <<EOF
 vfio
@@ -211,14 +212,16 @@ blacklist snd_hda_codec_hdmi
 blacklist i915
 EOF
 update-grub
+update-initramfs -u -k all
+#####重启######
 reboot
 
 # 从配置中拿出8086:4680的部分
-$gpu_info=lspci -n -s 00:02
+gpu_info=$(lspci -n -s 00:02 | perl -n -e'/00\:02.+? .+: (.+\:.+) \(rev 06\)/ && print $1')
 cat > /etc/modprobe.d/vfio.conf <<EOF
-options vfio-pci ids=8086:4680
+options vfio-pci ids=${gpu_info}
 EOF
-update-initramfs -u
+
 # 配置TrueNAS的网卡
 ######################Ubuntu中执行##########################
 # 配置Ubuntu的网卡
@@ -242,9 +245,9 @@ network:
         addresses: [8.8.8.8,114.114.114.114,192.168.3.1]
 EOF
 
-apt install intel-gpu-tools
-apt install libmfx1 libmfx-tools
-apt install libva-dev libmfx-dev intel-media-va-driver-non-free
+apt install -y intel-gpu-tools
+apt install -y libmfx1 libmfx-tools
+apt install -y libva-dev libmfx-dev intel-media-va-driver-non-free
 
 cat >> /etc/bash.bashrc <<EOF
 export LIBVA_DRIVER_NAME=iHD