The runner's own messages between steps (not step output) were uploaded to the job log at `log.level`, so raising `log.level` for local debugging also changed what workflow authors see in Gitea, and lowering it hid messages from them.
Add `runner.log_report_level` to set that independently. Unset, it still follows `log.level`, so existing setups behave as before. An invalid value is rejected when the config loads.
Assisted-by: Codet
Assisted-by: Claude Code:claude-opus-5-5
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1310
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Gitea derives the steps of a job from the workflow file, so the `pre` and `post` steps of actions only show up inside "Set up job" and "Complete job", see https://github.com/go-gitea/gitea/issues/24604.
The runner now also reports the steps as it runs them (https://gitea.com/gitea/actions-proto-def/pulls/19): "Set up job", a "Pre" and "Post" step for each action that has one, the workflow steps with their evaluated names, and "Complete job", as actions/runner shows them. The per-step state Gitea reads today is unchanged, and the job log only moves "Complete job name" and "Matrix:" ahead of the pre steps, so older Gitea versions keep showing everything as before. Job hooks and containers stay part of "Set up job" and "Complete job".
The `replace` of `gitea.dev/actionslib` is swapped for the release once the proto change is merged.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1293
Reviewed-by: Zettat123 <39446+zettat123@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Log through `log/slog`, with a console `slog.Handler` that writes the text the runner has always written (sorted `key=value` fields on a plain stream, a colored prefix on a terminal), so nothing changes for users. I compared its output byte for byte with logrus's `TextFormatter` over plain, colored, timestamped and caller cases.
Why not `slog.TextHandler`: its output differs from what users and their log parsers see today, and `ReplaceAttr` cannot close the gap.
- level is `WARN` where logrus wrote `warning`, and time has milliseconds and no quotes
- fields keep call order instead of being sorted
- the caller is one `source=` key, where the runner writes `func=` and `file=` (reshaped by `callPrettyfier`), and `ReplaceAttr` returns a single attribute
- no colored prefix on a terminal
- no hook to rewrite a whole formatted line, which the process-wide secret masking relies on
Libraries that log through logrus's global logger (the workflow model, the Docker client) are forwarded to the process-wide logger, so they keep following its level, format and secret masking. This is why logrus stays in `go.mod`.
Stacked on https://gitea.com/gitea/runner/pulls/1303.
Assisted-by: Codet
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1304
Reviewed-by: bircni <bircni@icloud.com>
Move the log calls in `internal` onto `logging`, and add what the process-wide logger setup and its tests need: `SetTextFormat` with a line filter for secret masking (replacing `report.MaskingFormatter`), `SetReportCaller`, `SetDefault` and `logtest.SetDefault`. After this only the `logging` package imports logrus.
Stacked on https://gitea.com/gitea/runner/pulls/1301.
Assisted-by: Codet
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1302
Reviewed-by: bircni <bircni@icloud.com>
Add `act/common/logging`: a printf-style `Logger` on a slog-shaped `Handler`, with a logrus-backed handler as the only backend, plus a `logtest` handler for tests. Move the job logger onto it: `common.Logger` returns `*logging.Logger`, the job log formatters and the `Reporter` hook become handlers, and composite step IDs travel in the context.
Logging is tightly coupled to logrus types (hooks, formatters, `Entry.Data`). Going through our own interface first lets the remaining call sites move over with unchanged behavior, and lets the backend be swapped for `log/slog` in one place afterwards. The global process logger and its masking formatter stay on logrus for now.
Assisted-by: Codet
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1295
Reviewed-by: bircni <bircni@icloud.com>
- Keep `GITHUB_ENV`, `GITHUB_OUTPUT`, `GITHUB_STATE` and `GITHUB_PATH` when a job times out or is cancelled, so post steps still get their state
- Retry the startup Declare while Gitea is unreachable instead of exiting, still failing fast on rejected registrations, auth and misconfiguration
- Reuse a local image when a platform variant such as `linux/arm/v7` is requested instead of pulling again
- Read `PATH` from the created job container so cross-architecture jobs get tool paths for the right architecture
- Extract action copies relative to the act volume so they never cross an image's `/var/run` symlink, which rootless Podman rejects
- Keep the job container's entrypoint when container options set `--entrypoint`, warning instead of appending it to the keep-alive command
- Lock action cache entries across runner processes that share a cache directory
- `exec`: omit `GITHUB_SERVER_URL` and `GITHUB_API_URL` without `--gitea-instance` instead of exporting a bare `https://`, and read owner and repository from any origin remote
Reviewed-on: https://gitea.com/gitea/runner/pulls/1294
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Sends the OTLP metrics under [OpenTelemetry semantic convention](https://opentelemetry.io/docs/specs/semconv/) names where the runner's data matches the definition, like `cicd.worker.count`, `cicd.system.errors` and the `go.*` and `process.*` runtime metrics, and under `gitea.runner.*` otherwise. OTel dashboards then work without remapping, as they already do for the traces from https://gitea.com/gitea/runner/pulls/1206.
Adds a `gitea_runner_state` gauge (`busy`, `idle`, `unavailable`), and `/readyz` now fails once the runner shuts down.
**Breaking**
1. OTLP metric names, units, types and attribute values change, and the info and start time metrics move to resource attributes.
1. Prometheus `gitea_runner_client_errors_total` gains a `code` label, and `gitea_runner_job_total` counts jobs stopped by `runner.timeout` as `timeout` instead of `failure`.
---------
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1282
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: wmTJc9IK0Q <231276+wmtjc9ik0q@noreply.gitea.com>
The Docker proxy labels every container, network and volume a job creates and removes them when the job ends, which breaks jobs that deploy long-running services to the runner's own Docker daemon. Document that behavior and add `container.sweep` (default `true`) so operators who deploy to the same daemon can opt out. Kept resources stay labeled with `com.gitea.runner.job`.
Fixes: https://gitea.com/gitea/runner/issues/1243
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1275
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Add `runner.client_cert_file` and `runner.client_key_file` for Gitea instances that require mutual TLS. The runner presents the certificate on its RPCs, job summary uploads, and the action, reusable workflow and `builtin:checkout` clones from the instance. The files are read on use, so renewed certificates apply without a restart. Job steps do not get them. An incomplete or mismatched pair fails startup.
Clones now decide the token, client certificate and `runner.insecure` with one host check, which also gives reusable workflow clones the TLS settings they lacked. `runner.insecure` still only covers the registered address.
Fixes: https://gitea.com/gitea/runner/issues/321
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1273
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Config values can reference the runner's environment as `${NAME}`, for example `capacity: ${RUNNER_CAPACITY}`, so container deployments can configure the runner without templating the file. An unset `NAME` fails the load instead of silently becoming empty, and `$${NAME}` writes a literal `${NAME}`. Keys are never expanded.
Breaking: an existing value containing `${NAME}`, such as a shell command in a Kubernetes `pod_template`, now needs `$${NAME}`.
Closes https://gitea.com/gitea/runner/issues/551
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1274
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Add `runner.extra_headers` for reverse proxies that require request headers on the runner's API requests to Gitea, like registration, polling and log and status reports.
Headers the runner sets itself (authentication, User-Agent, protocol headers) stay authoritative. Extra headers are dropped when a redirect changes the hostname or leaves HTTPS, while the runner's own authentication headers follow redirects as before. Invalid or case-insensitively duplicated header names are rejected at config load.
Fixes: https://gitea.com/gitea/runner/issues/171
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1269
Co-authored-by: bircni <bircni@icloud.com>
Allow `valid_volumes` entries ending in `:ro` to permit only read-only mounts, so a workflow can no longer mount writable a host path the runner only shares read-only, like a certificate store. `**:ro` allows any volume read-only. An entry without `:ro` that matches too still allows writable mounts.
A named volume allowed only through `:ro` is mounted with `nocopy`, because Docker otherwise fills an empty volume from the image even when it is mounted read-only.
Fixes: https://gitea.com/gitea/runner/issues/407
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1272
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
The runner now uses the `git` command line instead of go-git to download actions and reusable workflows. go-git had recurring bugs and does not support SHA-256 repositories, and full clones of actions are several times faster.
`builtin:checkout` now runs `git` where the job runs and behaves like `actions/checkout`:
1. A branch is checked out as a local branch tracking `origin`, tag and pull request runs keep their ref, and a triggering tag that moved fails the step.
1. Later steps can fetch and push with the persisted token or SSH key.
1. It supports the `ssh-*`, `lfs`, `submodules`, `sparse-checkout`, `filter`, `fetch-tags`, `clean`, `persist-credentials`, `show-progress` and `set-safe-directory` inputs and the `ref` and `commit` outputs.
1. SHA-256 repositories work for actions, reusable workflows and `builtin:checkout`.
Git keeps the token off its command line, ignores `GIT_DIR` and similar variables inherited by the runner, and keeps action files LF regardless of `core.autocrlf`. A cancelled job lets git remove its lock files.
This is a breaking change: the runner needs Git 2.34.1 or newer on its `PATH`, and so do job images that use `builtin:checkout`. The official runner images include it.
Fixes: https://gitea.com/gitea/runner/issues/1077
Fixes: https://gitea.com/gitea/runner/issues/1267
Fixes: https://gitea.com/gitea/runner/issues/1279
Fixes: https://gitea.com/gitea/runner/issues/1284
Fixes: https://gitea.com/gitea/runner/issues/1285
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1277
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Support tmpfs in container `options` via `--mount type=tmpfs,...`, like GitHub does. The `valid_volumes` check silently dropped these mounts because they have no source. A tmpfs is backed by memory and exposes nothing from the host, same as `--tmpfs`, which already passes. Every other mount still goes through the allowlist.
Both forms now work:
```yaml
services:
mysql:
image: mysql:8.4
options: --tmpfs /var/lib/mysql # already worked
```
```yaml
services:
mysql:
image: mysql:8.4
options: --mount type=tmpfs,destination=/var/lib/mysql # was dropped, now works
```
Reviewed-on: https://gitea.com/gitea/runner/pulls/1289
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Since https://github.com/go-gitea/gitea/pull/39578 (backported to v28), Gitea answers an unregistered runner with a Connect `Unauthenticated` error instead of a gRPC status wrapped as `Unknown`. `IsRegistrationRejected` missed it, so an ephemeral runner kept its spent registration file and failed on every restart. This also fails the `gitea/gitea:main-nightly` e2e job.
Match on the `unregistered runner` message suffix, which both shapes share. The code can't distinguish Gitea from a proxy, because a proxy's 401 with a JSON body also decodes as a wire `Unauthenticated` error.
Written by Claude Code.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1287
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
`gitea-runner register` pinged the instance in an unbounded loop, so a permanent failure like an untrusted certificate or a wrong URL never returned. It now pings once and returns the error, like other one-shot commands.
The image entrypoint keeps retrying registration indefinitely by default, like the daemon, so a container without a restart policy still recovers once Gitea is reachable. `GITEA_MAX_REG_ATTEMPTS` had no effect because its counter was incremented outside the loop. When set, it now caps the attempts, after which the entrypoint exits non-zero.
Fixes: https://gitea.com/gitea/runner/issues/1195
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1197
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Push the runner's Prometheus metrics to the OTLP endpoint next to the job traces, so both land in the same backend.
The `/metrics` registry is converted as the [Prometheus compatibility spec](https://opentelemetry.io/docs/specs/otel/compatibility/prometheus_and_openmetrics/) describes and sent through the existing gRPC-free client, so names stay unchanged and no second metrics stack is linked. Metrics are on by default and pushed every interval and once on shutdown, so ephemeral runners report too.
New standard variables, each `OTEL_EXPORTER_OTLP_*` one with `TRACES` and `METRICS` variants:
- `OTEL_METRICS_EXPORTER`, `none` turns metrics off
- `OTEL_METRIC_EXPORT_INTERVAL`, `OTEL_METRIC_EXPORT_TIMEOUT`
- `OTEL_EXPORTER_OTLP_TIMEOUT`, `OTEL_EXPORTER_OTLP_COMPRESSION`
- `OTEL_EXPORTER_OTLP_CERTIFICATE`, `OTEL_EXPORTER_OTLP_CLIENT_CERTIFICATE`, `OTEL_EXPORTER_OTLP_CLIENT_KEY`
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1248
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: wmTJc9IK0Q <231276+wmtjc9ik0q@noreply.gitea.com>
Ephemeral registrations are single-use, but the daemon kept `.runner` after the task, so a restarted container failed `Declare` with `unregistered runner` forever.
An ephemeral runner now removes its registration file as soon as it fetches a task, so a container killed mid-job registers afresh on restart. It also removes the file when Gitea answers `unregistered runner` at startup or while polling. A proxy's 401 does not count. Persistent runners keep their file, because Gitea sends the same reply for a token mismatch.
Closes https://gitea.com/gitea/runner/issues/818
---------
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1256
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Adds a Kubernetes backend. A `name:kubernetes://image` label runs the job as one pod through the Kubernetes API, with services as containers of the same pod. Step env is exported by a script sent over exec stdin, keeping it out of the pod spec and process arguments, and service env goes into a per-job Secret. Docker actions and container options are rejected. See `docs/kubernetes.md`.
Operators shape job pods with `kubernetes.pod_template`, with per-label `pod_templates` merged in `runs-on` order and a `$services` entry for service containers. The idle cleanup removes pods and Secrets a runner left behind.
The client calls the Kubernetes API directly and runs step commands over `coder/websocket` (same dependency used in gitea) instead of pulling in the heavyweight `kubernetes/client-go`. Includes an e2e test against k3s.
Replaces: https://gitea.com/gitea/runner/pulls/1000
Fixes: https://gitea.com/gitea/runner/issues/31
Assisted-by: Claude Code:claude-opus-5-5
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1260
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Zettat123 <39446+zettat123@noreply.gitea.com>
Co-authored-by: silverwind <me@silverwind.io>
The Docker entrypoint always checked `.runner` in `/data` and ignored `runner.file` from `CONFIG_FILE`. When `runner.file` pointed elsewhere, it re-registered on every start, or skipped registration because of a stale `.runner`. It now reads the path from a new `config runner-file` subcommand, which resolves `runner.file` the same way as `register` and `daemon`.
Closes https://gitea.com/gitea/runner/issues/585
---------
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1259
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Fixes https://github.com/go-gitea/gitea/issues/38705
Gitea side: https://github.com/go-gitea/gitea/pull/39452
Jobs of a called workflow currently see `gitea.event_name == "workflow_call"`, and their `gitea.event.inputs` is replaced by the caller's `with:`. On GitHub they keep the caller's event, and their `inputs` are the run's `workflow_dispatch` inputs overlaid with the caller's `with:`.
For compatibility with older runners, Gitea keeps sending that form and adds a `gitea_workflow_call` key with the original trigger event name and inputs of the run, and the `inputs` Gitea resolved for the job. When the key is present, the runner restores `gitea.event_name` and `gitea.event.inputs` from it, and uses the resolved `inputs` for the job's expressions and the setup log.
Without that key (older Gitea, or jobs outside called workflows), nothing changes.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1250
Reviewed-by: bircni <bircni@icloud.com>
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Store the cache used by `actions/cache` in an S3-compatible bucket such as AWS S3 or RustFS, with no `cache-server`. Runners with the same settings use the same cache.
A cache saved on one runner can be restored on the others within 30 seconds. The runner talks to the bucket over the S3 REST API with SigV4, without an SDK. Lifecycle rules on the bucket expire old caches.
*Description rewritten by Claude.*
---------
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1244
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Make cache requests go through the runner and remove outbound traffic from the cache server. The runner forwards them to `cache.external_server` when one is set, and attaches itself to each job network so jobs can reach it.
Benefits:
1. Jobs need no http proxy rules for the cache server, which `@actions/http-client` mishandles for CIDR ranges in `no_proxy` (https://github.com/actions/toolkit/pull/2495).
2. Only runners reach a shared cache server, which needs no route to Gitea.
3. A runner container sharing the host Docker socket now caches, where jobs previously could not reach it.
Breaks:
1. Jobs that reach `external_server` but not their runner, such as a remote `DOCKER_HOST`. The built-in cache has always needed that reachability, so both modes now agree. Set `cache.host` and `cache.port` to an address those jobs reach.
2. Jobs on `container.network: bridge`, where Docker rejects the alias, so the runner cannot attach and their cache fails as it does today. Leave `container.network` empty, or name a user-defined network.
*Written by Claude.*
---------
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1229
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
`valid_volumes` patterns now match with doublestar instead of gobwas/glob, which was compiled without separators so `*` crossed slashes. doublestar is already in the module graph, keeps `*` within one path segment and matches host paths with the OS separator, which fixes Windows patterns where a backslash was read as an escape.
Breaking: a host pattern that relied on `*` matching nested paths needs `**`, e.g. `/data/**` instead of `/data/*`. Named volumes and the bare `**` are unaffected.
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1214
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Adds built-in actions, native Go actions shipped with the runner and selected with `uses: builtin:<name>`. Jobs need no action download and no Node in their image.
The first one is `builtin:checkout`, a subset of `actions/checkout` with `repository`, `ref`, `token`, `path` and `fetch-depth`. Other inputs fail the step. The runner clones shallowly on its host and copies the tree into the job, while `gitea-runner exec` copies the local working directory for the workflow's own ref.
`actions/checkout` and other remote actions are unchanged. A clone ref of `HEAD` now shallow-clones the remote's default branch, which checkout uses for other repositories.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/871
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Updates actionslib to https://gitea.com/gitea/actionslib/releases/tag/v1.2.1.
1. A job whose `if:` fails to evaluate, like `fromJSON` of an invalid job output, is skipped with the error in its log instead of failing, like on GitHub Actions.
1. Workflows the runner reads itself, like with `exec`, are rejected when an expression does not parse, like an unclosed `${{` or an unknown context, instead of failing later.
1. Task payloads from Gitea are read without that check, because they hold evaluated text that may contain `${{`.
1. `if: False`, `if: ~` and other boolean, null or number conditions work.
Gitea PR: https://github.com/go-gitea/gitea/pull/39358
Reviewed-on: https://gitea.com/gitea/runner/pulls/1247
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Containers a job starts through its Docker socket, for example `docker run -v "$PWD:/src"`, `./data:/data` in docker compose, or actions like dockerfile-roast, can now bind-mount the workspace and other paths the job sees, as on a host, without `bind_workdir`.
The per-job Docker proxy rewrites container and volume create requests. A bind source, or the device of a `local` volume with `o: bind`, that lies under one of the job container's mounts is pointed at that mount's path on the daemon, read from inspecting the job container. Paths that already name a daemon path, like `GITEA_DOCKER_WORKSPACE`, and paths outside the job's mounts pass through unchanged.
The proxy now also starts when the runner runs in a container given the host's Docker socket, by placing its socket in the runner's working directory, and in rootless dind, by granting the daemon socket's group through an ACL.
Fixes https://gitea.com/gitea/runner/issues/1219
Fixes https://gitea.com/gitea/runner/issues/1193
Reviewed-on: https://gitea.com/gitea/runner/pulls/1226
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Every cache hit rewrote the entry's access time, costing a bolt write and fsync per restore. Completed entries accessed within the last minute are no longer rewritten, and the in-use and retention windows grow by that minute so nothing is evicted earlier. Same-second rewrites are skipped, reservations are inserted in one transaction, and prefix lookups use the repository index instead of scanning every entry.
The store is still opened per request. Keeping it open, as this commit first did, is faster under concurrency but stops a second process sharing the cache directory from starting its cache server.
The README caching section is condensed and corrected.
| Benchmark, v2 | main | store kept open | this PR |
| --- | ---: | ---: | ---: |
| Exact hit, 1 client | 16.42 | 0.15 | 0.24 |
| Exact hit, 8 clients | 13.70 | 0.08 | 1.28 |
| Exact hit, 32 clients | 16.01 | 0.07 | 4.26 |
| Prefix hit, 8 clients | 18.34 | 0.12 | 1.28 |
| Miss, 8 clients | 3.21 | 0.11 | 1.28 |
| Save and restore 1 MiB, 8 clients | 74.4 | 22.9 | 34.9 |
| Geomean, all 22 benchmarks | 14.03 | 0.31 | 2.11 |
Mean ms per request, medians of 4 rounds of 300 requests over 1,000 entries on an Apple M3 Max.
---------
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1222
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Implement speedups to job start and shutdown.
- Create the job container while services are still becoming healthy, and poll their health at a flat one second instead of a 2s to 32s doubling backoff
- Pull each service image once instead of twice, and fetch a warm action cache once instead of twice
- Report the job result before reclaiming its volumes, and reap volumes stranded by a runner that died mid-job
| Step | Scenario | Before | After |
| --- | --- | --- | --- |
| Complete job | Large workspace volume | 4.2s | 0.4s |
| Set up job | One service, 2s health interval | 7.08s | 3.26s |
| Set up job | Two cached actions from github.com | 1.81s | 1.34s |
| Set up job | Two cached actions from gitea.com | 2.42s | 1.95s |
| Set up job | Two actions, cold action cache | 6.62s | unchanged |
| Set up job | Minimal job, no services or actions | 0.62s | unchanged |
Assisted-by: Claude Code:Opus 5
Reviewed-on: https://gitea.com/gitea/runner/pulls/1218
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Three independent fixes, one commit each.
1. Hosts and ports were interpolated directly when building URLs, so a literal IPv6 address produced an unbracketed authority, making `ACTIONS_CACHE_URL`, `ACTIONS_RUNTIME_URL` and the artifact server listener unusable. Hosts are expected bare, as documented for `cache.host`, so an address that already carries brackets is no longer accepted.
2. `cache-server` waited on its own `os.Interrupt` channel and ignored SIGTERM, so service managers and container runtimes had to kill it.
3. Task admission used a separate `Load` and `Store`, so two concurrent dispatches of the same task id could both be admitted.
Assisted-by: Claude Code:Opus 5
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1217
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Cache v2 makes the cache server the `ACTIONS_RESULTS_URL` origin, so artifact calls arrived there and were proxied on to Gitea, failing whenever it could not reach the instance.
- Artifact calls are answered with a redirect, so the cache server opens no connection to Gitea. A scheme change or an untrusted instance is still proxied, but there the cache server is the runner itself, which already reaches Gitea.
- Failures answer in twirp, not an empty `502` that clients report as `Unexpected end of JSON input`.
- `cache.v2: false` really points artifacts at Gitea now.
- Cache reservations are bound to the job that made them, so two jobs saving one key cannot commit against each other's upload, and a retry after a lost answer no longer fails a saved entry.
- The toolkit patch, which edits the GitHub-host check out of an action's bundle, was left in the shared checkout where a job running with `runner.patch_actions: false` could inherit it. It is put back after the job's copy.
- `exec` names an origin for the cache v2 it advertises, and masks its runtime token.
Behaviour changes: `no_proxy` no longer exempts `cache.external_server`, and `cache.enabled: false` also stops external registration.
Fixes https://gitea.com/gitea/runner/issues/1208
Fixes https://gitea.com/gitea/runner/issues/1211
Assisted by Claude (Opus 5).
Reviewed-on: https://gitea.com/gitea/runner/pulls/1216
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
1. Add `GITEA_DOCKER_WORKSPACE` which holds the workspace path as the daemon sees it, enabling `${GITEA_DOCKER_WORKSPACE:-.}/data:/app/data` in a compose file without having to resort to `bind_workdir` (which causes much more problems like breaking `actions/cache` because of unstable workspace paths).
2. Add container/network/volume cleanup for containers started within jobs, for example via `docker compose` inside a job. It works by running a lightweight docker socket proxy and injecting a `com.gitea.runner.job` label into every container creation and that label is used to remove containers started by that job at the end. Perf impact of this is near-zero.
Docs: https://gitea.com/gitea/docs/pulls/535
Assisted by Claude (Fable 5.1).
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1204
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Automatically allow workspace mounts in `valid_volumes` for the mounts done via `bind_workdir`, this obsoletes the need for `/workspace/**` or other insecure configurations which would expose workspaces between tasks.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1203
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Fixes 51 bugs discovered via comparison with `actions/runner`. Every fix has test coverage.
### Secrets
- A short secret registered no shifted-base64 form, so `base64("user:$TOKEN")` printed in the clear
- Encoded forms came only from the whole trimmed value, missing padded and per-line spellings
- Masks split only on `\n`, so `::add-mask::a%0Db` registered neither half
- Adds XML, expression-string and quote-trimming encoders
### Workflow commands
- Split at the last `::` or `]` rather than the first, so `::add-mask::a::b` registered no mask
- A command on the last line without a newline was ignored, and `::ADD-MASK::` did nothing
- `##[...]` did not decode `%3B`/`%5D`, properties lost anything after a second `=`
- `$GITHUB_ENV` and `::set-env::` now refuse `NODE_OPTIONS`
### Status
- `continue-on-error` reported failed, a cancelled job reported success, an `if:` error reported cancelled
- File commands ran after `continue-on-error`, failing the job while the step stayed green
- A bad job output aborted the whole run instead of that job
### Steps and actions
- `${{ matrix.* }}` and `${{ strategy.* }}` were empty inside composite actions
- Composite inputs leaked into nested actions as `INPUT_*`, `with:` matched case-sensitively, `pre` failures were dropped
- Docker actions dropped `runs.env` when the caller passed `with: args:`, and caller `args`/`entrypoint` beat the manifest
- An implicit shell ran with `pipefail`, a `shell:` without `{0}` passed without running
- `container.env` overrode job env and every `$GITHUB_ENV` write, heredocs lost leading blank lines, `$GITHUB_PATH` was not BOM-decoded
Written by Claude Opus 5.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1194
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Service containers were built without a volume policy, so every bind and mount they declared was dropped, whatever `valid_volumes` allowed. GitHub passes a service's declared volumes straight to `docker create`, so a workflow that mounts into a service silently did nothing here. Services now get the configured policy, but not `validVolumes()`, which would also hand them the docker daemon socket that GitHub mounts only into the job container.
### What changes for users
On the default `valid_volumes: []` nothing changes: a service's volumes are still dropped, now with a warning rather than in silence. Once `valid_volumes` is configured, a service's declared volumes are honored under it instead of discarded, which is what that setting already documents. No workflow that worked before stops working, and a service can reach no volume the policy does not already allow the job container, so this is not a breaking change.
---------
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1186
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
A secret in a matrix value reached the log in the clear:
```yaml
strategy:
matrix:
include: "${{ github.token }}"
```
Chasing that one route is pointless, so this masks every sink a secret leaves a job by: the uploaded log rows and the on-disk `job.log`, both through one choke point in `appendLogRow`; the runner's own log, which is where planning errors like that one land with no job logger in reach; the job logger's stdout under debug logging; job summaries; job outputs; and the job name that becomes a container name.
Values the runner knows but the job never declared, the proxy password and the task token, are hidden the same way. Masks apply longest first, since `strings.Replacer` matches in argument order and one secret prefixing another would otherwise mask the prefix and print the rest.
### What changes for users
An output whose value carries a secret is skipped with a warning instead of sent, matching GitHub. Output that showed a secret now shows `***`. `ACTIONS_STEP_DEBUG` and `ACTIONS_RUNNER_DEBUG` are never masked, also matching GitHub, so an output of `true` still reaches the jobs that need it.
Each fix has a test that fails without it.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1188
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Gitea slices a task's single log stream into steps by the LogIndex/LogLength that UpdateTask carries. The reporter's daemon flushed log rows without those counters, which only left on the separate state ticker, so rows the server acked between two state reports belonged to no step. The web UI attributes them to no step while the job runs, and a runner that stops reporting in that window leaves them under "Complete job" for good once Gitea finalizes the task.
The three log-flush paths now report the state describing the rows the server just took, so the gap is at most one RPC. Live output also stops waiting up to `state_report_interval` to become visible. An idle job adds no requests.
This does not explain why the runner in that job stopped reporting for 13m40s until Gitea reaped the task as a zombie, that needs the runner host's own log.
Fixes https://gitea.com/gitea/runner/issues/1184
---------
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1189
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
The runner's own `container.options` and the workflow's were joined into one string before parsing, so the host-escape filter added in https://gitea.com/gitea/runner/pulls/1058 dropped the administrator's options along with the workflow's. Setups that need `--device` or `--security-opt` from the config file had no way left to get them short of enabling privileged mode.
`NewContainerInput` now carries the two sources apart, as `RunnerOptions` and `WorkflowOptions`, down to the point where the filter runs. With privileged mode off, the host-escape fields are reset to what the runner's own options parse to on their own, so only the workflow's contribution is dropped.
Three further ways a workflow's options reached past its container, all resolved on the runner before anything reaches the daemon:
1. `--env-file` and `--label-file` name files that are read on the runner, so any file it could read became container environment or labels. Both are refused from a workflow now, and still serve the runner's own options.
2. A bare `--env NAME` was resolved from the runner's own environment by docker's validator. That lookup is gone, for every source. Use `runner.envs` or `runner.env_file` to pass a variable on.
3. A volume driver decides for itself what it mounts, and the local driver's `device=` option turns a name `valid_volumes` allows into a bind of any host path. A workflow's mounts may no longer carry one.
`--isolation`, `--volume-driver` and the two paths `--security-opt systempaths=unconfined` lands in were also missing from the fields a workflow may not set.
Last, the `--network and --net in the options will be ignored.` warning fired for every container, because the runner's own network mode is fed into the parsed options before the check runs.
Fixes https://gitea.com/gitea/runner/issues/1142
Reviewed-on: https://gitea.com/gitea/runner/pulls/1151
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Adds a real-Gitea compatibility suite against stable and nightly to catch runner and API drift before release.
The suite shares one Gitea and regular runner, using repository runners only for cache v1/v2 and ephemeral behavior. It covers registration, payload and log encoding, secrets, variables, services, artifacts, outputs, matrices, cache, dispatch, live logs, cancellation, and ephemeral teardown.
CI runs both images in parallel. Warm local timings:
| Image | Before | After |
| --- | ---: | ---: |
| `gitea/gitea:latest` | ~70s | 26.54s |
| `gitea/gitea:main-nightly` | ~54s | 22.53s |
The former serial matrix took about 2 minutes. Parallel suite execution is now bounded by the slower ~26.5-second variant.
Shared Renovate matcher: https://gitea.com/gitea/renovate-config/pulls/552
---------
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1180
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
