actionslib v1.4.1 no longer logs through logrus, so the workflow model no longer needs the logrus bridge. The bridge stays for docker/cli and moby/go-archive, which still log through logrus's global logger; the comment now says so.
actionslib now logs through slog's global logger, which the runner did not capture. A new slog bridge forwards it to the process-wide logger, so its messages keep the runner's level, format and secret masking.
Assisted-by: Codet
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1313
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
A runner nested behind another runner's docker proxy, as in gitea.com CI, had its `com.gitea.runner.job` label overwritten by the outer proxy, so its job cleanup removed nothing. This failed `TestDockerProxyWithDaemon` depending on the CI host, for example on https://gitea.com/gitea/runner/pulls/1312.
Each proxy now sets `com.gitea.runner.job.<job>` and cleans up by that key, so nested proxies keep each other's. This replaces the `com.gitea.runner.job=<job>` label.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1314
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Gitea derives the steps of a job from the workflow file, so the `pre` and `post` steps of actions only show up inside "Set up job" and "Complete job", see https://github.com/go-gitea/gitea/issues/24604.
The runner now also reports the steps as it runs them (https://gitea.com/gitea/actions-proto-def/pulls/19): "Set up job", a "Pre" and "Post" step for each action that has one, the workflow steps with their evaluated names, and "Complete job", as actions/runner shows them. The per-step state Gitea reads today is unchanged, and the job log only moves "Complete job name" and "Matrix:" ahead of the pre steps, so older Gitea versions keep showing everything as before. Job hooks and containers stay part of "Set up job" and "Complete job".
The `replace` of `gitea.dev/actionslib` is swapped for the release once the proto change is merged.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1293
Reviewed-by: Zettat123 <39446+zettat123@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Replace go-git in `exec --use-gitignore` filtering with `git ls-files`. The git CLI is already required for action clones since https://gitea.com/gitea/runner/pulls/1277, so this drops `go-git` and 14 other modules, and filtering now follows git's own ignore rules.
Also stop deleting a remote action's `.gitignore` before copying it. Tracked files are never filtered, so the deletion only made copied actions differ from GitHub's action tarballs.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1309
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Log through `log/slog`, with a console `slog.Handler` that writes the text the runner has always written (sorted `key=value` fields on a plain stream, a colored prefix on a terminal), so nothing changes for users. I compared its output byte for byte with logrus's `TextFormatter` over plain, colored, timestamped and caller cases.
Why not `slog.TextHandler`: its output differs from what users and their log parsers see today, and `ReplaceAttr` cannot close the gap.
- level is `WARN` where logrus wrote `warning`, and time has milliseconds and no quotes
- fields keep call order instead of being sorted
- the caller is one `source=` key, where the runner writes `func=` and `file=` (reshaped by `callPrettyfier`), and `ReplaceAttr` returns a single attribute
- no colored prefix on a terminal
- no hook to rewrite a whole formatted line, which the process-wide secret masking relies on
Libraries that log through logrus's global logger (the workflow model, the Docker client) are forwarded to the process-wide logger, so they keep following its level, format and secret masking. This is why logrus stays in `go.mod`.
Stacked on https://gitea.com/gitea/runner/pulls/1303.
Assisted-by: Codet
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1304
Reviewed-by: bircni <bircni@icloud.com>
Move the log calls in `internal` onto `logging`, and add what the process-wide logger setup and its tests need: `SetTextFormat` with a line filter for secret masking (replacing `report.MaskingFormatter`), `SetReportCaller`, `SetDefault` and `logtest.SetDefault`. After this only the `logging` package imports logrus.
Stacked on https://gitea.com/gitea/runner/pulls/1301.
Assisted-by: Codet
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1302
Reviewed-by: bircni <bircni@icloud.com>
Add `act/common/logging`: a printf-style `Logger` on a slog-shaped `Handler`, with a logrus-backed handler as the only backend, plus a `logtest` handler for tests. Move the job logger onto it: `common.Logger` returns `*logging.Logger`, the job log formatters and the `Reporter` hook become handlers, and composite step IDs travel in the context.
Logging is tightly coupled to logrus types (hooks, formatters, `Entry.Data`). Going through our own interface first lets the remaining call sites move over with unchanged behavior, and lets the backend be swapped for `log/slog` in one place afterwards. The global process logger and its masking formatter stay on logrus for now.
Assisted-by: Codet
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1295
Reviewed-by: bircni <bircni@icloud.com>
- Keep `GITHUB_ENV`, `GITHUB_OUTPUT`, `GITHUB_STATE` and `GITHUB_PATH` when a job times out or is cancelled, so post steps still get their state
- Retry the startup Declare while Gitea is unreachable instead of exiting, still failing fast on rejected registrations, auth and misconfiguration
- Reuse a local image when a platform variant such as `linux/arm/v7` is requested instead of pulling again
- Read `PATH` from the created job container so cross-architecture jobs get tool paths for the right architecture
- Extract action copies relative to the act volume so they never cross an image's `/var/run` symlink, which rootless Podman rejects
- Keep the job container's entrypoint when container options set `--entrypoint`, warning instead of appending it to the keep-alive command
- Lock action cache entries across runner processes that share a cache directory
- `exec`: omit `GITHUB_SERVER_URL` and `GITHUB_API_URL` without `--gitea-instance` instead of exporting a bare `https://`, and read owner and repository from any origin remote
Reviewed-on: https://gitea.com/gitea/runner/pulls/1294
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
The Docker proxy labels every container, network and volume a job creates and removes them when the job ends, which breaks jobs that deploy long-running services to the runner's own Docker daemon. Document that behavior and add `container.sweep` (default `true`) so operators who deploy to the same daemon can opt out. Kept resources stay labeled with `com.gitea.runner.job`.
Fixes: https://gitea.com/gitea/runner/issues/1243
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1275
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Add `runner.client_cert_file` and `runner.client_key_file` for Gitea instances that require mutual TLS. The runner presents the certificate on its RPCs, job summary uploads, and the action, reusable workflow and `builtin:checkout` clones from the instance. The files are read on use, so renewed certificates apply without a restart. Job steps do not get them. An incomplete or mismatched pair fails startup.
Clones now decide the token, client certificate and `runner.insecure` with one host check, which also gives reusable workflow clones the TLS settings they lacked. `runner.insecure` still only covers the registered address.
Fixes: https://gitea.com/gitea/runner/issues/321
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1273
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Allow `valid_volumes` entries ending in `:ro` to permit only read-only mounts, so a workflow can no longer mount writable a host path the runner only shares read-only, like a certificate store. `**:ro` allows any volume read-only. An entry without `:ro` that matches too still allows writable mounts.
A named volume allowed only through `:ro` is mounted with `nocopy`, because Docker otherwise fills an empty volume from the image even when it is mounted read-only.
Fixes: https://gitea.com/gitea/runner/issues/407
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1272
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
The runner now uses the `git` command line instead of go-git to download actions and reusable workflows. go-git had recurring bugs and does not support SHA-256 repositories, and full clones of actions are several times faster.
`builtin:checkout` now runs `git` where the job runs and behaves like `actions/checkout`:
1. A branch is checked out as a local branch tracking `origin`, tag and pull request runs keep their ref, and a triggering tag that moved fails the step.
1. Later steps can fetch and push with the persisted token or SSH key.
1. It supports the `ssh-*`, `lfs`, `submodules`, `sparse-checkout`, `filter`, `fetch-tags`, `clean`, `persist-credentials`, `show-progress` and `set-safe-directory` inputs and the `ref` and `commit` outputs.
1. SHA-256 repositories work for actions, reusable workflows and `builtin:checkout`.
Git keeps the token off its command line, ignores `GIT_DIR` and similar variables inherited by the runner, and keeps action files LF regardless of `core.autocrlf`. A cancelled job lets git remove its lock files.
This is a breaking change: the runner needs Git 2.34.1 or newer on its `PATH`, and so do job images that use `builtin:checkout`. The official runner images include it.
Fixes: https://gitea.com/gitea/runner/issues/1077
Fixes: https://gitea.com/gitea/runner/issues/1267
Fixes: https://gitea.com/gitea/runner/issues/1279
Fixes: https://gitea.com/gitea/runner/issues/1284
Fixes: https://gitea.com/gitea/runner/issues/1285
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1277
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Support tmpfs in container `options` via `--mount type=tmpfs,...`, like GitHub does. The `valid_volumes` check silently dropped these mounts because they have no source. A tmpfs is backed by memory and exposes nothing from the host, same as `--tmpfs`, which already passes. Every other mount still goes through the allowlist.
Both forms now work:
```yaml
services:
mysql:
image: mysql:8.4
options: --tmpfs /var/lib/mysql # already worked
```
```yaml
services:
mysql:
image: mysql:8.4
options: --mount type=tmpfs,destination=/var/lib/mysql # was dropped, now works
```
Reviewed-on: https://gitea.com/gitea/runner/pulls/1289
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
The Kubernetes backend extracted CopyDir archives at "/" with entries like
"var/run/act/actions/<sha>/...". Ubuntu's patched tar refuses to extract
through an absolute symlink, failing with "Invalid cross-device link" on
images that link /var/run to /run, so actions never reached the job
container. Extract at the destination with relative entries instead, like
Copy already does.
This is a similar issue to #1128, but for k8s instead of Docker.
I built the image and deployed it to my k8s cluster to verify the fix.
---------
Co-authored-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1286
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: Drew Inglis <drew@drewinglis.com>
- Docker actions evaluate `runs.args` and `runs.env` with their own `inputs`, so a same-named `workflow_dispatch` input no longer replaces the step's `with:` value
- Dockerfile action images are tagged per step and job and removed afterwards, so changed Dockerfiles rebuild and concurrent jobs never share an image
- Workflow and job `env` are evaluated before job and service container credentials and service `env` use them
- Docker actions in host jobs get the host workspace and file-command directory mounted, and no longer inherit the runner's own `PATH`
- Cache server address detection accepts a single interface address
Fixes: https://gitea.com/gitea/runner/issues/390
Fixes: https://gitea.com/gitea/runner/issues/406
Fixes: https://gitea.com/gitea/runner/issues/578
Related: https://gitea.com/gitea/runner/issues/64
Reviewed-on: https://gitea.com/gitea/runner/pulls/1268
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Adds a Kubernetes backend. A `name:kubernetes://image` label runs the job as one pod through the Kubernetes API, with services as containers of the same pod. Step env is exported by a script sent over exec stdin, keeping it out of the pod spec and process arguments, and service env goes into a per-job Secret. Docker actions and container options are rejected. See `docs/kubernetes.md`.
Operators shape job pods with `kubernetes.pod_template`, with per-label `pod_templates` merged in `runs-on` order and a `$services` entry for service containers. The idle cleanup removes pods and Secrets a runner left behind.
The client calls the Kubernetes API directly and runs step commands over `coder/websocket` (same dependency used in gitea) instead of pulling in the heavyweight `kubernetes/client-go`. Includes an e2e test against k3s.
Replaces: https://gitea.com/gitea/runner/pulls/1000
Fixes: https://gitea.com/gitea/runner/issues/31
Assisted-by: Claude Code:claude-opus-5-5
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1260
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Zettat123 <39446+zettat123@noreply.gitea.com>
Co-authored-by: silverwind <me@silverwind.io>
1. Host mode is selected only through `runs-on` again, as in upstream act.
1. A workflow volume that `valid_volumes` drops no longer displaces the runner's own socket, workspace, tool cache or `/var/run/act` mount, so `/var/run/docker.sock:/var/run/docker.sock` works on hosts whose daemon socket lives elsewhere.
1. `docker://` is stripped from job and service images, as on GitHub.
1. Each created service's log is printed at job end, and service log dumps no longer run workflow commands, as on GitHub.
1. A `--privileged` dropped because privileged mode is off now logs a warning.
1. README: the proxy variables change per step through `env:` or for the rest of a job through `$GITHUB_ENV`, `container.env` does not override them.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1253
Reviewed-by: Zettat123 <39446+zettat123@noreply.gitea.com>
Co-authored-by: silverwind <me@silverwind.io>
Fixes https://github.com/go-gitea/gitea/issues/38705
Gitea side: https://github.com/go-gitea/gitea/pull/39452
Jobs of a called workflow currently see `gitea.event_name == "workflow_call"`, and their `gitea.event.inputs` is replaced by the caller's `with:`. On GitHub they keep the caller's event, and their `inputs` are the run's `workflow_dispatch` inputs overlaid with the caller's `with:`.
For compatibility with older runners, Gitea keeps sending that form and adds a `gitea_workflow_call` key with the original trigger event name and inputs of the run, and the `inputs` Gitea resolved for the job. When the key is present, the runner restores `gitea.event_name` and `gitea.event.inputs` from it, and uses the resolved `inputs` for the job's expressions and the setup log.
Without that key (older Gitea, or jobs outside called workflows), nothing changes.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1250
Reviewed-by: bircni <bircni@icloud.com>
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Store the cache used by `actions/cache` in an S3-compatible bucket such as AWS S3 or RustFS, with no `cache-server`. Runners with the same settings use the same cache.
A cache saved on one runner can be restored on the others within 30 seconds. The runner talks to the bucket over the S3 REST API with SigV4, without an SDK. Lifecycle rules on the bucket expire old caches.
*Description rewritten by Claude.*
---------
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1244
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Make cache requests go through the runner and remove outbound traffic from the cache server. The runner forwards them to `cache.external_server` when one is set, and attaches itself to each job network so jobs can reach it.
Benefits:
1. Jobs need no http proxy rules for the cache server, which `@actions/http-client` mishandles for CIDR ranges in `no_proxy` (https://github.com/actions/toolkit/pull/2495).
2. Only runners reach a shared cache server, which needs no route to Gitea.
3. A runner container sharing the host Docker socket now caches, where jobs previously could not reach it.
Breaks:
1. Jobs that reach `external_server` but not their runner, such as a remote `DOCKER_HOST`. The built-in cache has always needed that reachability, so both modes now agree. Set `cache.host` and `cache.port` to an address those jobs reach.
2. Jobs on `container.network: bridge`, where Docker rejects the alias, so the runner cannot attach and their cache fails as it does today. Leave `container.network` empty, or name a user-defined network.
*Written by Claude.*
---------
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1229
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
`valid_volumes` patterns now match with doublestar instead of gobwas/glob, which was compiled without separators so `*` crossed slashes. doublestar is already in the module graph, keeps `*` within one path segment and matches host paths with the OS separator, which fixes Windows patterns where a backslash was read as an escape.
Breaking: a host pattern that relied on `*` matching nested paths needs `**`, e.g. `/data/**` instead of `/data/*`. Named volumes and the bare `**` are unaffected.
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1214
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Adds built-in actions, native Go actions shipped with the runner and selected with `uses: builtin:<name>`. Jobs need no action download and no Node in their image.
The first one is `builtin:checkout`, a subset of `actions/checkout` with `repository`, `ref`, `token`, `path` and `fetch-depth`. Other inputs fail the step. The runner clones shallowly on its host and copies the tree into the job, while `gitea-runner exec` copies the local working directory for the workflow's own ref.
`actions/checkout` and other remote actions are unchanged. A clone ref of `HEAD` now shallow-clones the remote's default branch, which checkout uses for other repositories.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/871
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
Updates actionslib to https://gitea.com/gitea/actionslib/releases/tag/v1.2.1.
1. A job whose `if:` fails to evaluate, like `fromJSON` of an invalid job output, is skipped with the error in its log instead of failing, like on GitHub Actions.
1. Workflows the runner reads itself, like with `exec`, are rejected when an expression does not parse, like an unclosed `${{` or an unknown context, instead of failing later.
1. Task payloads from Gitea are read without that check, because they hold evaluated text that may contain `${{`.
1. `if: False`, `if: ~` and other boolean, null or number conditions work.
Gitea PR: https://github.com/go-gitea/gitea/pull/39358
Reviewed-on: https://gitea.com/gitea/runner/pulls/1247
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
A composite action's child run context starts with empty step results, so a nested action's `post-if: success()` saw the composite's own result and still ran after the job had failed, which let `actions/cache` save caches from failed jobs.
The `job` context now always comes from the job's run context. Only `success()` and `failure()` in a composite's own main steps read the composite's result, matching GitHub Actions.
Assisted-by: Claude Code:claude-fable-5-1
Reviewed-on: https://gitea.com/gitea/runner/pulls/1242
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Re-sync `act/container/docker_cli.go` and `act/container/docker_cli_test.go` to docker/cli v29.8.1, the version go.mod pins. The copies lacked the `--umask` flag added in v29.8.0, so `container.options` rejected it as unknown. Daemons below API 1.56 ignore the setting.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1238
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Podman creates a missing bind source instead of rejecting it, so the Docker proxy probe passed even when the daemon could not see the runner's files. Jobs of Podman runners in a container got an empty directory at `/var/run/docker.sock` (https://gitea.com/gitea/runner/issues/1193#issuecomment-1700501).
The probe now binds the directory and stats its marker through the created container. A runner in a container stats the marker through its own container, so it no longer creates probe containers, which cost up to 2s per job. `make test-dind TARGET=podman` runs the probe against Podman in CI.
Reviewed-on: https://gitea.com/gitea/runner/pulls/1231
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Containers a job starts through its Docker socket, for example `docker run -v "$PWD:/src"`, `./data:/data` in docker compose, or actions like dockerfile-roast, can now bind-mount the workspace and other paths the job sees, as on a host, without `bind_workdir`.
The per-job Docker proxy rewrites container and volume create requests. A bind source, or the device of a `local` volume with `o: bind`, that lies under one of the job container's mounts is pointed at that mount's path on the daemon, read from inspecting the job container. Paths that already name a daemon path, like `GITEA_DOCKER_WORKSPACE`, and paths outside the job's mounts pass through unchanged.
The proxy now also starts when the runner runs in a container given the host's Docker socket, by placing its socket in the runner's working directory, and in rootless dind, by granting the daemon socket's group through an ACL.
Fixes https://gitea.com/gitea/runner/issues/1219
Fixes https://gitea.com/gitea/runner/issues/1193
Reviewed-on: https://gitea.com/gitea/runner/pulls/1226
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Mount the job workspace volume, or the `bind_workdir` directory, above `<owner>/<repo>` instead of at the repository, like GitHub's work directory.
With the repository as a mount point, pnpm 12 puts its store in `node_modules/.pnpm-store` (https://github.com/pnpm/pnpm/pull/13536), so a restored `setup-node` pnpm cache creates `node_modules` before install. Renames into `$RUNNER_WORKSPACE` fail with `EXDEV` and removing the workspace fails with `EBUSY`.
Verified against GitHub hosted and container jobs with cold and warm caches, on volume and `bind_workdir` runners, covering checkout, cache, artifacts, github-script, the node, pnpm, bun, python, uv, go, rust, java, gradle, dotnet, ruby and terraform setup actions, docker and Dockerfile actions, buildx, compose via `GITEA_DOCKER_WORKSPACE`, services, host mode, `container.volumes` on the workspace and `exec`.
---------
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1224
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Every cache hit rewrote the entry's access time, costing a bolt write and fsync per restore. Completed entries accessed within the last minute are no longer rewritten, and the in-use and retention windows grow by that minute so nothing is evicted earlier. Same-second rewrites are skipped, reservations are inserted in one transaction, and prefix lookups use the repository index instead of scanning every entry.
The store is still opened per request. Keeping it open, as this commit first did, is faster under concurrency but stops a second process sharing the cache directory from starting its cache server.
The README caching section is condensed and corrected.
| Benchmark, v2 | main | store kept open | this PR |
| --- | ---: | ---: | ---: |
| Exact hit, 1 client | 16.42 | 0.15 | 0.24 |
| Exact hit, 8 clients | 13.70 | 0.08 | 1.28 |
| Exact hit, 32 clients | 16.01 | 0.07 | 4.26 |
| Prefix hit, 8 clients | 18.34 | 0.12 | 1.28 |
| Miss, 8 clients | 3.21 | 0.11 | 1.28 |
| Save and restore 1 MiB, 8 clients | 74.4 | 22.9 | 34.9 |
| Geomean, all 22 benchmarks | 14.03 | 0.31 | 2.11 |
Mean ms per request, medians of 4 rounds of 300 requests over 1,000 entries on an Apple M3 Max.
---------
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1222
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Implement speedups to job start and shutdown.
- Create the job container while services are still becoming healthy, and poll their health at a flat one second instead of a 2s to 32s doubling backoff
- Pull each service image once instead of twice, and fetch a warm action cache once instead of twice
- Report the job result before reclaiming its volumes, and reap volumes stranded by a runner that died mid-job
| Step | Scenario | Before | After |
| --- | --- | --- | --- |
| Complete job | Large workspace volume | 4.2s | 0.4s |
| Set up job | One service, 2s health interval | 7.08s | 3.26s |
| Set up job | Two cached actions from github.com | 1.81s | 1.34s |
| Set up job | Two cached actions from gitea.com | 2.42s | 1.95s |
| Set up job | Two actions, cold action cache | 6.62s | unchanged |
| Set up job | Minimal job, no services or actions | 0.62s | unchanged |
Assisted-by: Claude Code:Opus 5
Reviewed-on: https://gitea.com/gitea/runner/pulls/1218
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Three independent fixes, one commit each.
1. Hosts and ports were interpolated directly when building URLs, so a literal IPv6 address produced an unbracketed authority, making `ACTIONS_CACHE_URL`, `ACTIONS_RUNTIME_URL` and the artifact server listener unusable. Hosts are expected bare, as documented for `cache.host`, so an address that already carries brackets is no longer accepted.
2. `cache-server` waited on its own `os.Interrupt` channel and ignored SIGTERM, so service managers and container runtimes had to kill it.
3. Task admission used a separate `Load` and `Store`, so two concurrent dispatches of the same task id could both be admitted.
Assisted-by: Claude Code:Opus 5
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1217
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Cache v2 makes the cache server the `ACTIONS_RESULTS_URL` origin, so artifact calls arrived there and were proxied on to Gitea, failing whenever it could not reach the instance.
- Artifact calls are answered with a redirect, so the cache server opens no connection to Gitea. A scheme change or an untrusted instance is still proxied, but there the cache server is the runner itself, which already reaches Gitea.
- Failures answer in twirp, not an empty `502` that clients report as `Unexpected end of JSON input`.
- `cache.v2: false` really points artifacts at Gitea now.
- Cache reservations are bound to the job that made them, so two jobs saving one key cannot commit against each other's upload, and a retry after a lost answer no longer fails a saved entry.
- The toolkit patch, which edits the GitHub-host check out of an action's bundle, was left in the shared checkout where a job running with `runner.patch_actions: false` could inherit it. It is put back after the job's copy.
- `exec` names an origin for the cache v2 it advertises, and masks its runtime token.
Behaviour changes: `no_proxy` no longer exempts `cache.external_server`, and `cache.enabled: false` also stops external registration.
Fixes https://gitea.com/gitea/runner/issues/1208
Fixes https://gitea.com/gitea/runner/issues/1211
Assisted by Claude (Opus 5).
Reviewed-on: https://gitea.com/gitea/runner/pulls/1216
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
Fixes https://gitea.com/gitea/runner/issues/1213
Fix the DooD regression that mounts `/var/run/docker.sock` as a directory. Keep the Docker proxy available through job and post steps. Clean stale resources before opening it, then remove containers before their networks and volumes during teardown.
Use a unique filesystem probe and preserve socket ownership. Fall back to direct access when proxying is unsupported. Preserve exec output and clean up active streams and failed starts.
Add a real Docker job test for mounted socket access, post steps and resource cleanup.
---------
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1215
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
1. Dependency updates: gobwas/glob v1.0.0, which replaced its `Glob` interface with `*Pattern`, logrus v1.10.2, prometheus/client_model v0.6.3, golangci-lint v2.13.2, Go 1.27.1, docker/setup-qemu-action and nginx digests.
2. `make fmt-check` and `make tidy-check` report only what the formatter or `go mod tidy` would change, so unrelated uncommitted work no longer fails `make checks`.
---------
Co-authored-by: silverwind <me@silverwind.io>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1212
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: Renovate Bot <renovate-bot@gitea.com>
1. Add `GITEA_DOCKER_WORKSPACE` which holds the workspace path as the daemon sees it, enabling `${GITEA_DOCKER_WORKSPACE:-.}/data:/app/data` in a compose file without having to resort to `bind_workdir` (which causes much more problems like breaking `actions/cache` because of unstable workspace paths).
2. Add container/network/volume cleanup for containers started within jobs, for example via `docker compose` inside a job. It works by running a lightweight docker socket proxy and injecting a `com.gitea.runner.job` label into every container creation and that label is used to remove containers started by that job at the end. Perf impact of this is near-zero.
Docs: https://gitea.com/gitea/docs/pulls/535
Assisted by Claude (Fable 5.1).
Co-authored-by: bircni <bircni@icloud.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1204
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
An action pinned to a full commit hash cloned the whole repository, and a cached one hit the network on every run. Now only the pinned commit is fetched at depth 1, a cached commit is reused with no network at all, and the action's `.git` directory no longer ships into the job container, matching GitHub.
```
repo cold ms warm ms cache KiB
actions/checkout 5807 → 787 1064 → 12 11492 → 2349
actions/setup-node 15257 → 1013 1365 → 21 64303 → 9924
actions/cache 18782 → 760 1589 → 16 60890 → 12507
actions/setup-go 5513 → 764 589 → 20 16600 → 9104
docker/login-action 25809 → 1225 1288 → 10 81709 → 12503
```
Reviewed-on: https://gitea.com/gitea/runner/pulls/1209
Reviewed-by: bircni <bircni@icloud.com>
Co-authored-by: silverwind <me@silverwind.io>
An expression that failed to evaluate was logged and replaced by an empty string, so a `run:` step executed an empty script and reported success. The same swallow covered `shell:`, `working-directory:`, step `env:`, `with:`, `uses:`, the job's `env:`, `container:`, `services:`, `runs-on:` and outputs, and a called workflow's `with:` and `secrets:`. Every interpolation now propagates its error as actions/runner does: step-level values fail the step, job-level values fail the job at setup, `timeout-minutes` logs the error and runs unbounded, and a job or step name keeps its source text.
`defaults.run` and a called workflow's inputs and secrets are resolved once at job setup with the job context rather than per step, and the job's image is resolved once, so host mode and `ImageOS` derive from the image the job started with.
Closes https://gitea.com/gitea/runner/issues/392
Closes https://gitea.com/gitea/runner/issues/555
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <2021+silverwind@noreply.gitea.com>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1199
Reviewed-by: silverwind <2021+silverwind@noreply.gitea.com>
Co-authored-by: bircni <bircni@icloud.com>
