#!/bin/bash
#
#获取凝思操作系统下日志及相关的配置信息脚本get_parameter_log.sh
#如果运行该脚本时，带参数1为-somelog时，则生成的/opt/${hostname}.${DATE}.tgz文件中只包含部分日志信息
#如果运行该脚本时，带参数1为-alllog时，则生成的/opt/${hostname}.${DATE}.tgz文件中包含/var/log/目录下的所有日志信息
#
#北京凝思科技有限公司技术支持部
#叶金成
#2013-02-18
#
echo_fail() {
        echo -e "\\033[1;31m" "failed"
}

reset_color() {
        echo -en "\\033[0;39m"
}

#exit_script() {

# 	echo -e  "由于凝思安全功能不正常，是否提前退出收集信息脚本(y/n)?\n"  
# 	echo -e  "Because linx security function is not normal, whether early exit collect information script(y/n)?\n"  
#  	read   flag_of_exit 
#  	if [ -z ${flag_of_exit} ]
#  	then
#     		flag_of_exit="n"
#  	fi
#  	if [ ${flag_of_exit} == "y" ];then
#		reset_color
#     		exit 1
#  	fi
#}
#grep '6.0.3' /etc/issue &>/dev/null
#if [ $? -eq 0 ];then
#	if [ -d /sys/kernel/security/linx ];then
#		echo "The linx6.0.3 safety function is normal"
#	else 
#		echo "The linx6.0.3 safety function abnormal"
#		echo_fail
#		exit_script
#	fi
#else
#	lsmod |grep linx &>/dev/null
#	if [ $? -eq 0 ];then
#		echo "The rocky4.2 or linx6.0.4 security module is loaded."
#	else
#		echo "The rocky4.2 or linx6.0.4 security module isn't loaded."
#		echo_fail
#		exit_script
#	fi
#fi
reset_color
export LANG=posix
E_BADARGS=65

if [ $# -lt 1 -o "x$1" != "x-somelog" -a "x$1" != "x-alllog" ];then
	echo "usage: `basename $0` -somelog bond0"
	echo "usage: `basename $0` -somelog eth0"
	echo "or"
	echo "usage: `basename $0` -alllog bond0"
	echo "usage: `basename $0` -alllog eth0"
	exit $E_BADARGS
fi
DATE=$(date +%Y%m%d%H%M%S)
hostname=`uname -n`
#check root user's  HISTTIMEFORMAT
grep HISTTIMEFORMAT /root/.bashrc &> /dev/null
if [ $? -ne 0 ];then
	#设置保存历史命令的文件大小
	echo "HISTFILESIZE=200000" >> /root/.bashrc
	#保存历史命令条数
	echo "HISTSIZE=200000" >> /root/.bashrc
	#实时记录历史命令，默认只有在用户退出之后才会统一记录，很容易造成多用户间的相互覆盖
	echo "export PROMPT_COMMAND=\"history -a\"">>/root/.bashrc
	#记录每条历史命令的执行时间
	echo "HISTTIMEFORMAT=\"%Y%m%d-%H%M%S:\"" >> /root/.bashrc
	echo "export HISTTIMEFORMAT" >> /root/.bashrc
fi
grep HISTTIMEFORMAT ~sysadmin/.bashrc &> /dev/null
if [ $? -ne 0 ];then
	#设置保存历史命令的文件大小
	echo "HISTFILESIZE=200000" >> ~sysadmin/.bashrc
	#保存历史命令条数
	echo "HISTSIZE=200000" >> ~sysadmin/.bashrc
	#实时记录历史命令，默认只有在用户退出之后才会统一记录，很容易造成多用户间的相互覆盖
	echo "export PROMPT_COMMAND=\"history -a\"">>~sysadmin/.bashrc
	#记录每条历史命令的执行时间
	echo "HISTTIMEFORMAT=\"%Y%m%d-%H%M%S:\"" >> ~sysadmin/.bashrc
	echo "export HISTTIMEFORMAT" >> ~sysadmin/.bashrc
fi
id d5000
if [ $? -eq 0 ];then
	chmod -R 644 ~d5000/.history_log/*
fi
id ems
if [ $? -eq 0 ];then
	chmod -R 644 ~ems/.history_log/*
fi
id oms
if [ $? -eq 0 ];then
	chmod -R 644 ~oms/.history_log/*
fi
id kingsoft
if [ $? -eq 0 ];then
	grep HISTTIMEFORMAT ~kingsoft/.bashrc &> /dev/null
	if [ $? -ne 0 ];then
		#设置保存历史命令的文件大小
		echo "HISTFILESIZE=200000" >> ~kingsoft/.bashrc
		#保存历史命令条数
		echo "HISTSIZE=200000" >> ~kingsoft/.bashrc
		#实时记录历史命令，默认只有在用户退出之后才会统一记录，很容易造成多用户间的相互覆盖
		echo "export PROMPT_COMMAND=\"history -a\"" >> ~kingsoft/.bashrc
		#记录每条历史命令的执行时间
		echo "HISTTIMEFORMAT=\"%Y%m%d-%H%M%S:\"" >> ~kingsoft/.bashrc
		echo "export HISTTIMEFORMAT" >> ~kingsoft/.bashrc
		echo "#include .bashrc if it exists">>~kingsoft/.profile
		echo "if [ -f \"\$HOME/.bashrc\" ];then">>~kingsoft/.profile
		echo ". \"\$HOME/.bashrc\"">>~kingsoft/.profile
		echo "fi">>~kingsoft/.profile
		chown kingsoft.kingsoft ~kingsoft/.bashrc
		chown kingsoft.kingsoft ~kingsoft/.profile
	fi
fi
mkdir /tmp/${hostname}
cd /tmp/${hostname}
ifconfig eth0> ./${hostname}.eth0-mac-address
cp /etc/fstab  ./${hostname}.fstab
ls -al /sys/kernel/security/linx/ >  ./${hostname}.sys.kernel.security.linx
cp /etc/security/LinxSetupSign  ./${hostname}.etc.security.LinxSetupSign
cp /etc/hosts  ./${hostname}.hosts
cp /etc/network/interfaces   ./${hostname}.etc.network.interfaces
cp /etc/rc.d/rc.local ./${hostname}.etc.rc.d.rc.local
cp /etc/X11/xorg.conf ./${hostname}.etc.X11.xorg.conf
cp /etc/cgconfig.conf ./${hostname}.etc.cgconfig.conf
cp /etc/cgrules.conf ./${hostname}.etc.cgrules.conf
cp /etc/ntp.conf ./${hostname}.etc.ntp.conf
cp /etc/ntp/ntp.conf ./${hostname}.etc.ntp.ntp.conf
cp /etc/linxsn/cgroup_sn.conf ./${hostname}.etc.linxsn.cgroup_sn.conf
cp /etc/linxsn/HA_sn.conf ./${hostname}.etc.linxsn.HA_sn.conf
cp /etc/linxsn/multipath_sn.conf ./${hostname}.etc.linxsn.multipath_sn.conf
cp /etc/sysctl.conf ./${hostname}.etc.sysctl.conf
tar czvf  ./${hostname}.etc.sysctl.d.tgz /etc/sysctl.d
tar czvf  ./${hostname}.etc.logrotate.d.tgz /etc/logrotate.d
cp /etc/modprobe.conf ./${hostname}.modprobe.conf
tar czvf  ./${hostname}.etc.modprobe.d.tgz /etc/modprobe.d
cp /etc/sysconfig/modules ./${hostname}.etc.sysconfig.modules
cp /etc/ld.so.conf ./${hostname}.etc.ld.so.conf
tar czvf  ./${hostname}.etc.ld.so.conf.d.tgz /etc/ld.so.conf.d
cp /usr/sbin/update_time.sh ./${hostname}.usr.sbin.update_time.sh
cat /proc/cmdline>./${hostname}.cmdline
cat /proc/asound/cards>./${hostname}.proc.asound.cards
df -h >./${hostname}.df.-h
df -ih >./${hostname}.df.-ih
last -i >./${hostname}.last.-i.wtmp
last -i -f /var/log/btmp >./${hostname}.last.-i.btmp
lastlog  >./${hostname}.lastlog
smartctl -a /dev/sda  >./${hostname}.smartctl.sda
smartctl -a /dev/sdb  >./${hostname}.smartctl.sdb
smartctl -a /dev/sdc  >./${hostname}.smartctl.sdc
smartctl -a /dev/sdd  >./${hostname}.smartctl.sdd
#append history into ~root/.bash_history or ~sysadmin/.bash_history
history -a
#clear history
history -c
#read ~root/.bash_history or ~sysadmin/.bash_history
history -r
#将~root/.bash_history文件中的unix时间格式转换成可正常显示的格式并保存到./${hostname}.history.root文件中
(perl -pe 's/(\d+)/localtime($1)/e' ~root/.bash_history)>./${hostname}.history.root
#将~sysadmin/.bash_history文件中的unix时间格式转换成可正常显示的格式并保存到./${hostname}.history.sysadmin文件中
(perl -pe 's/(\d+)/localtime($1)/e' ~sysadmin/.bash_history)>./${hostname}.history.sysadmin
mkdir .history_log
id d5000
if [ $? -eq 0 ];then
	#su - d5000 -c "history -M;history -S"
	mkdir .history_log/d5000
	for filename in `ls ~d5000/.history_log`
	do
		(perl -pe 's/(\d+)/localtime($1)/e' ~d5000/.history_log/${filename})>.history_log/d5000/${filename}.bak
		mv .history_log/d5000/${filename}.bak  .history_log/d5000/${filename}
	done
	chown -R d5000.d5000 .history_log/d5000 
fi
id ems
if [ $? -eq 0 ];then
	#su - ems -c "history -M;history -S"
	mkdir .history_log/ems
	for filename in `ls ~ems/.history_log`
	do
		(perl -pe 's/(\d+)/localtime($1)/e' ~ems/.history_log/${filename})>.history_log/ems/${filename}.bak
		mv .history_log/ems/${filename}.bak  .history_log/ems/${filename}
	done
	chown -R ems.ems .history_log/ems 
fi
id oms
if [ $? -eq 0 ];then
	#su - oms -c "history -M;history -S"
	#(perl -pe 's/(\d+)/localtime($1)/e' ~oms/.history)>./${hostname}.history.oms
	mkdir .history_log/oms
	for filename in `ls ~oms/.history_log`
	do
		(perl -pe 's/(\d+)/localtime($1)/e' ~oms/.history_log/${filename})>.history_log/oms/${filename}.bak
		mv .history_log/oms/${filename}.bak  .history_log/oms/${filename}
	done
	chown -R oms.oms .history_log/oms 
fi
id kingsoft
if [ $? -eq 0 ];then
	su - kingsoft -c "history -a;history -c;history -r"
	(perl -pe 's/(\d+)/localtime($1)/e' ~kingsoft/.bash_history)>./${hostname}.history.kingsoft
fi
dmesg>./${hostname}.dmesg
lspci -vvnn>./${hostname}.lspci.-vvnn
lshw>./${hostname}.lshw
dmidecode>./${hostname}.dmidecode
iostat -d -x -k 1 10 > ./${hostname}.iostat.-d.-x.-k.1-10
cat ~d5000/cgroup_limits/d5000_limits/tasks>./${hostname}.cgroup.d5000.tasks
cat ~ems/cgroup_limits/ems_limits/tasks>./${hostname}.cgroup.ems.tasks
cat ~oms/cgroup_limits/oms_limits/tasks>./${hostname}.cgroup.oms.tasks
cat /lxcg/d5000_limits/tasks>./${hostname}.lxcg.cgroup.d5000.tasks
cat /lxcg/ems_limits/tasks>./${hostname}.lxcg.cgroup.ems.tasks
cat /lxcg/oms_limits/tasks>./${hostname}.lxcg.cgroup.oms.tasks
free>./${hostname}.free
top -bn10 >./${hostname}.top.-bn10
fdisk -l >./${hostname}.fdisk.-l
grep '6.0.3' /etc/issue &>/dev/null
if [ $? -ne 0 ];then
	parted  -l >./${hostname}.parted.-l
fi
top -bn1 -H >./${hostname}.top.-bn1.-H
mii-tool>./${hostname}.mii-tool
ipmitool -I open sel list>./${hostname}.ipmitool.i.open.sel.list
ipmitool -I open sdr>./${hostname}.ipmitool.i.open.sdr
ipmitool -I open sensor list>./${hostname}.ipmitool.i.open.sensor.list
ipmitool -I open chassis restart_cause>./${hostname}.ipmitool.i.open.chassis.restart_cause
ipmitool -I open chassis policy list>./${hostname}.ipmitool.i.open.chassis.policy.list
cat /proc/loadavg >./${hostname}.proc.loadavg
cat /proc/net/bonding/bond0 >./${hostname}.proc.net.bonding.bond0
cat /proc/net/bonding/bond1 >./${hostname}.proc.net.bonding.bond1
cat /proc/stat >./${hostname}.proc.stat
cat /proc/cpuinfo >./${hostname}.proc.cpuinfo
cat /proc/vmstat >./${hostname}.proc.vmstat
vmstat 1 10 >./${hostname}.vmstat.1_10
cat /etc/issue >./${hostname}.etc.issue
uname -a >./${hostname}.uname.-a
crm configure show>./${hostname}.crm.configure.show
crm_mon -1>./${hostname}.crm_mon.-1
cat /etc/corosync/corosync.conf >./${hostname}.etc.corosync.corosync.conf
corosync-cfgtool -s >./${hostname}.corosync-cfgtool.-s
cat /etc/corosync/lxha_iplist.conf >./${hostname}.etc.corosync.lxha_iplist.conf
cat /etc/multipath.conf >./${hostname}.etc.multipath.conf
multipath -ll >./${hostname}.multipath-ll
cat /etc/lvm/lvm.conf >./${hostname}.etc.lvm.lvm.conf
cat /etc/security/limits.conf >./${hostname}.etc.security.limits.conf
cat /proc/meminfo >./${hostname}.proc.meminfo
lsmod >./${hostname}.lsmod
sysctl -A>./${hostname}.sysctl.-A
ulimit -a>./${hostname}.ulimit.-a
lsof>./${hostname}.lsof
cat /etc/audit/audit.rules>./${hostname}.etc.audit.audit.rules
cat ~d5000/.tcshrc>./${hostname}.d5000.tcshrc
cat ~oms/.tcshrc>./${hostname}.oms.tcshrc
cat ~ems/.tcshrc>./${hostname}.ems.tcshrc
cat /etc/crontab>./${hostname}.etc.crontab
tar czvf ./${hostname}.etc.tgz /etc/rc.d /etc/init.d /etc/rc?.d
tar czvf ./${hostname}.etc.security.tgz /etc/security
tar czvf ./${hostname}.etc.pam.d.tgz /etc/pam.d
faillog -a > ./${hostname}.faillog.-a
crontab -u d5000 -l>./${hostname}.var.spool.cron.crontabs.d5000
netstat -anp>./${hostname}.netstat.-anp
ps auxww>./${hostname}.ps.auxww
ps eauxf>./${hostname}.ps.eauxf
ps -efL>./${hostname}.ps.-efL
pstree >./${hostname}.pstree
ifconfig -a>./${hostname}.ifconfig.-a
route>./${hostname}.route
ip route show>./${hostname}.ip.route.show
GATEWAY=`route -n|grep ^0.0.0.0|awk '{print $2}'`
ping -c 10 ${GATEWAY}>./${hostname}.ping.-c.10.gateway

#wmli@linx-info.com,2013-05-20,get disk parameter
DISK=$(fdisk -l|grep Disk|grep dev|awk -F':' '{print $1}'|awk '{print $NF}')
DF=$(hostname).Diskinfo
echo 'DiskInfo' > $DF
echo "======================================================"|tee -a $DF
if [ $(which hdparm)  ];then
	for i in $DISK
	do
		echo -n "$i "|tee -a $DF
		echo "$(hdparm -I $i 2>/dev/null|grep 'device size with M = 1000\*1000:'|awk '{print $(NF-1),$NF}')"|tee -a $DF
		echo "$(hdparm -I $i 2>/dev/null|grep 'Model Number:')"|tee -a $DF
		echo "$(hdparm -I $i 2>/dev/null|grep 'Serial Number:')"|tee -a $DF
		echo "$(hdparm -I $i 2>/dev/null|grep 'Transport:')"|tee -a $DF
		echo "$(hdparm -I $i 2>/dev/null|grep 'Form Factor:')"|tee -a $DF
		echo "$(hdparm -I $i 2>/dev/null|grep 'Nominal Media Rotation Rate: 7200')"|tee -a $DF
		echo "------------------------------------------------------"|tee -a $DF
	done
else
	echo "hdparm: command not found!">>${DF}
fi

#get network interface bond0 flow
if [ -z $2 ];then
	eth_name="bond0"
else

	eth_name=$2
fi	
i=0
send_o=`ifconfig $eth_name | grep bytes | awk '{print $6}' | awk -F : '{print $2}'`
recv_o=`ifconfig $eth_name | grep bytes | awk '{print $2}' | awk -F : '{print $2}'`
send_n=$send_o
recv_n=$recv_o
send_max_r=0
recv_max_r=0
send_max_b=0
recv_max_b=0
save_filename=${hostname}.network_flow_data
echo "network_flow program started run">${save_filename}
echo "network interface  ${eth_name}">>${save_filename}
date>>${save_filename}
start_time=`date +\%s`
flag_of_end="n"
#while  [ ${flag_of_end} != "y" ]
#默认运行1分钟，如果提示结束运行时，输入y，可以提前结束
while [ $i -lt 60 ]
 do
  send_l=$send_n
  recv_l=$recv_n
  echo -e  "默认获取1分钟时间内的${eth_name}的网络流量\n"  
  echo -e  "The network traffic by default for 1 minutes ${eth_name}\n"  
  echo -e  "是否提前结束网络流量的获取(y/n)?\n"  
  echo -e  "Gets whether early termination network traffic(y/n)?\n"  
  read  -t 3 flag_of_end 
  if [ -z ${flag_of_end} ]
  then
     flag_of_end="n"
  fi
  if [ ${flag_of_end} == "y" ];then
     break
  fi
  send_n=`ifconfig $eth_name | grep bytes | awk '{print $6}' | awk -F : '{print $2}'`
  recv_n=`ifconfig $eth_name | grep bytes | awk '{print $2}' | awk -F : '{print $2}'`
#  i=`expr $i + 3`
  ((i=i+3))
  echo $i
#  let "i=i+3"
  #send_r=`expr \( $send_n - $send_l \) / 3`
  ((send_r=((send_n - send_l)/3)))
  echo $send_n
  echo $send_l
  echo $send_r
  #send_b=`expr $send_r \* 8`
  ((send_b=send_r * 8))
#除法运算，scale=2为指定小数位数为2位
  send_bm=$(echo "scale=2;$send_b/1048576"|bc) 
  send_bytem=$(echo "scale=2;$send_b/1048576/8"|bc) 
 # recv_r=`expr \( $recv_n - $recv_l \) / 3`
  ((recv_r=((recv_n - recv_l)/3)))
  echo $recv_n
  echo $recv_l
  echo $recv_r
  #recv_b=`expr $recv_r \* 8`
  ((recv_b=recv_r * 8))
  recv_bm=$(echo "scale=2;$recv_b/1048576"|bc) 
  recv_bytem=$(echo "scale=2;$recv_b/1048576/8"|bc) 
  #total_r=`expr  $send_r + $recv_r `
  ((total_r=send_r + recv_r))
  echo $total_r
  #total_b=`expr $total_r \* 8`
  ((total_b=total_r * 8))
  total_bm=$(echo "scale=2;$total_b/1048576"|bc) 
  total_bytem=$(echo "scale=2;$total_b/1048576/8"|bc) 
  #send_ra=`expr \( $send_n - $send_o \) / $i`
  ((send_ra=((send_n - send_o)/i)))
  echo $send_n
  echo $send_o
  echo $send_ra
  #send_ba=`expr $send_ra \* 8`
  ((send_ba=send_ra * 8))
  send_bam=$(echo "scale=2;$send_ba/1048576"|bc) 
  send_byteam=$(echo "scale=2;$send_ba/1048576/8"|bc) 
  #recv_ra=`expr \( $recv_n - $recv_o \) / $i`
  ((recv_ra=((recv_n - recv_o)/i)))
  echo $recv_n
  echo $recv_o
  echo $recv_ra
  #recv_ba=`expr $recv_ra \* 8`
  ((recv_ba=recv_ra * 8))
  recv_bam=$(echo "scale=2;$recv_ba/1048576"|bc) 
  recv_byteam=$(echo "scale=2;$recv_ba/1048576/8"|bc) 
  #total_ra=`expr $send_ra + $recv_ra`
  ((total_ra=send_ra + recv_ra))
  echo $total_ra
  #total_ba=`expr $total_ra \* 8`
  ((total_ba=total_ra * 8))
  total_bam=$(echo "scale=2;$total_ba/1048576"|bc) 
  total_byteam=$(echo "scale=2;$total_ba/1048576/8"|bc) 
  echo -e "send_r:$send_r send_max_r:$send_max_r\n"
  if [ $send_r -gt $send_max_r ];then
	send_max_r=$send_r
  fi	
  #send_max_b=`expr $send_max_r \* 8`
  ((send_max_b=send_max_r * 8))
  send_max_bm=$(echo "scale=2;$send_max_b/1048576"|bc) 
  send_max_bytem=$(echo "scale=2;$send_max_b/1048576/8"|bc) 
  if [ $recv_r -gt $recv_max_r ];then
	recv_max_r=$recv_r
  fi	
  #recv_max_b=`expr $recv_max_r \* 8`
  ((recv_max_b=recv_max_r * 8))
  recv_max_bm=$(echo "scale=2;$recv_max_b/1048576"|bc) 
  recv_max_bytem=$(echo "scale=2;$recv_max_b/1048576/8"|bc) 
  sendn=`ifconfig $eth_name | grep bytes | awk -F \( '{print $3}' | awk -F \) '{print $1}'`
  send_dropped=`ifconfig $eth_name |grep "TX packets"| grep dropped | awk -F \: '{print $4}' | awk '{print $1}'`
  echo $send_dropped
  #total_max_r=`expr $send_max_r + $recv_max_r`
  ((total_max_r=send_max_r + recv_max_r))
  #total_max_b=`expr $total_max_r \* 8`
  ((total_max_b=total_max_r * 8))
  total_max_m=$(echo "scale=2;$total_max_b/1048576"|bc) 
  total_max_bytem=$(echo "scale=2;$total_max_b/1048576/8"|bc) 
  recvn=`ifconfig $eth_name | grep bytes | awk -F \( '{print $2}' | awk -F \) '{print $1}'`
  recv_dropped=`ifconfig $eth_name | grep "RX packets" | grep dropped | awk -F \: '{print $4}' | awk '{print $1}'`
  echo $recv_dropped
  clear
  echo -e "network_flow.sh has been running $i seconds \n">>${save_filename} 2>&1
  echo -e "Last second  :   Send rate: $send_r Bytes/sec  Recv rate: $recv_r Bytes/sec  Total rate: $total_r Bytes/sec\n">>${save_filename} 2>&1
  echo -e  "Last second  :   Send rate: $send_b Bits/sec  Recv rate: $recv_b Bits/sec  Total rate: $total_b Bits/sec\n">>${save_filename} 2>&1
  echo -e "Last second  :   Send rate: $send_bm Mbps  Recv rate: $recv_bm Mbps  Total rate: $total_bm Mbps\n">>${save_filename} 2>&1
  echo -e "Last second  :   Send rate: $send_bytem Mbyte/sec  Recv rate: $recv_bytem Mbyte/sec  Total rate: $total_bytem Mbyte/sec\n">>${save_filename} 2>&1
  echo -e "Average value:   Send rate: $send_ra Bytes/sec  Recv rate: $recv_ra Bytes/sec  Total rate: $total_ra Bytes/sec\n">>${save_filename} 2>&1
  echo -e "Average value:   Send rate: $send_ba Bits/sec  Recv rate: $recv_ba Bits/sec  Total rate: $total_ba Bites/sec\n">>${save_filename} 2>&1
  echo -e "Average value:   Send rate: $send_bam Mbps  Recv rate: $recv_bam Mbps  Total rate: $total_bam Mbps\n">>${save_filename} 2>&1
  echo -e "Average value:   Send rate: $send_byteam Mbyte/sec  Recv rate: $recv_byteam Mbyte/sec  Total rate: $total_byteam Mbyte/sec\n">>${save_filename} 2>&1
  echo -e "Maximun value:   Send rate: $send_max_r Bytes/sec  Recv rate: $recv_max_r Bytes/sec  Total rate: $total_max_r Bytes/sec\n">>${save_filename} 2>&1
  echo -e  "Maximun value:   Send rate: $send_max_b Bits/sec  Recv rate: $recv_max_b Bits/sec  Total rate: $total_max_b Bits/sec\n">>${save_filename} 2>&1
  echo -e  "Maximun value:   Send rate: $send_max_bm Mbps   Recv rate: $recv_max_bm Mbps  Total rate: $total_max_m Mbps\n">>${save_filename} 2>&1
  echo -e  "Maximun value:   Send rate: $send_max_bytem Mbyte/sec   Recv rate: $recv_max_bytem Mbyte/sec  Total rate: $total_max_bytem Mbyte/sec\n">>${save_filename} 2>&1
  echo -e  "Send dropped packets numbers: $send_dropped \n">>${save_filename} 2>&1
  echo -e  "Recv dropped packets numbers: $recv_dropped \n">>${save_filename} 2>&1
 done
  echo  -e "Total traffic after startup:    Send traffic: $sendn  Recv traffic: $recvn\n">>${save_filename} 2>&1
end_time=`date +\%s`
#use_time_s=`expr $end_time - $start_time`
((use_time_s=end_time - start_time))
#use_time_h=`expr $use_time_s / 3600` 
((use_time_h=use_time_s / 3600)) 
  echo -e "Get network flow  time:  $use_time_s seconds\n">>${save_filename} 2>&1
  echo -e "Get network flow time:  $use_time_h hours\n">>${save_filename} 2>&1


if [ "x$1" = "x-alllog" ]
then
	tar czvf ./${hostname}.var.log.tgz /var/log/*
elif [ "x$1" = "x-somelog" ]
then
	tail -20000 /var/log/messages >./${hostname}.var.log.messages.20000
	tail -20000 /var/log/kernel >./${hostname}.var.log.kernel.20000
	tail -20000 /var/log/kern.log >./${hostname}.var.log.kern.log.20000
	tail -20000 /var/log/errors >./${hostname}.var.log.errors.20000
	tail -20000 /var/log/syslog >./${hostname}.var.log.syslog.20000
	tail -20000 /var/log/auth >./${hostname}.var.log.auth.20000
	tail -20000 /var/log/audit/audit.log >./${hostname}.var.log.audit.audit.log.20000
	tail -20000 /var/log/auth.log >./${hostname}.var.log.auth.log.20000
	tail -20000 /var/log/corosync.log >./${hostname}.var.log.corosync.log.20000
	tail -20000 /tmp/corosync.log >./${hostname}.tmp.corosync.log.20000
	tail -20000 /var/log/Xorg.0.log >./${hostname}.var.log.Xorg.0.log.20000
	tail -20000 /var/log/Xorg.1.log >./${hostname}.var.log.Xorg.1.log.20000
	#tar czvf ./${hostname}.linx-watch-top.tgz /var/log/linx*.log
fi
#tar czvf /opt/${hostname}.${DATE}.tgz /tmp/${hostname}
rm ~sysadmin/*.tgz
tar czvf ~sysadmin/${hostname}.${DATE}.tgz /tmp/${hostname}
chown sysadmin.sysadmin ~sysadmin/${hostname}.${DATE}.tgz

rm -rf /tmp/${hostname}
export LANG=zh_CN.utf-8