* Add docstring
* Call dict.setdefault to simplify the code a little which constructs the map
from package name to built RPMs' NVRs.
Signed-off-by: Chenxiong Qi <cqi@redhat.com>
This fixes module builds which sets the `buildopts` for something else
than the RPM whitelist.
Before this commit, when `buildopts` was set, the RPM whitelist was
always taken from the buildopts even if it was not defined there.
This resulted in empty `rpm_whitelist` and therefore no pkglist set
in Koji tag.
In this commit, MBS uses whitelist from `buildopts` only if it is
really set by the module maintainer.
Currently, we are using just `conf.arches` and `conf.base_module_arches`
to define the list of arches for which the RPMs in a submitted module are
built. This is not enough, because RCM needs to generate modules based
on the base modules which should use different arches.
This commit changes the MBS to take the list of arches from the buildrequired
module build. It checks the buildrequires for "privileged" module or base
module and if it finds such module, it queries the Koji to find out the list
of arches to set for the module.
The "privileged" module is a module which can override base module arches
or disttag. Previously, these modules have been defined by
`allowed_disttag_marking_module_names` config option. In this commit,
this has been renamed to `allowed_privileged_module_names`.
The list of arches are stored per module build in new table represented
by ModuleArch class and are m:n mapped to ModuleBuild.
This also moves the methods load_mmd and load_mmd_file to
module_build_service.utils.general.
This also removes some MSE unit tests with a mix of positive and
negative streams since this is not supported in libmodulemd v2. The
user will be presented with a syntax error if they try to submit
such a modulemd file.
Our current code has following issues with -debuginfo/-debugsource handling:
- The foo-debuginfo is included in the MMD only when foo is included there,
but some special packages contain custom -debuginfo sub-packages like
foo-common-debuginfo without matching foo-common sub-package. With our
current code, the foo-common-debuginfo is never included in the final MMD.
- The foo-debugsource is included in the MMD only when foo.src.rpm,
but some special packages contain custom -debuginfo sub-package.
This commit changes the handling of -debuginfo/-debugsource like this:
- The RPMs to include in the final MMD are evaluated in particular order now.
At first we evaluate non-debug RPMs and then debug RPMs.
- When handling the foo-debuginfo/foo-debugsource RPM, we include it in
final MMD only in one of these cases:
- The "foo" is included in the MMD file (it means it is not filtered out).
- The "foo" package does not exist at all (it means only foo-debuginfo exists
and we need to include this package unless filtered out) and in the same time
the SRPM from which this -debuginfo/-debugsource RPM has been built is included
in a final MMD (it means that there is at least some package from this build
included - this handles case when only foo.src.rpm and foo-debugsource.rpm
would be included in a final MMD, which would be wrong.)
We also respect filters here, so it is possible to explicitely filter out also
-debuginfo/-debugsource packages.
GenericResolver.extract_modulemd is not removed, but deprecated. Call of it
will result in a deprecation message printed. Any new code should call
load_mmd.
Signed-off-by: Chenxiong Qi <cqi@redhat.com>
Previously MockModuleBuilder was checking the module state to see if
it should run a final createrepo, but since eafa93037f, finalize() is
called before changing the module state; add an explicit boolean to
GenericBuilder.finalize() to avoid worrying about ordering.
This is needed for offline local builds to build a component which is
stored on local git repository.
This PR also adds OfflineLocalBuildConfiguration configuration class
for offline local builds to set the RESOLVER.
There are following changes introduced in this commit:
- The `koji_tag` of module builds imported from the local repositories
is now in `repofile:///etc/yum.repos.d/some.repo` format to store the
repository from which the module was imported to local MBS DB.
- The `koji_tag` of fake base module is set to empty `repofile://`
and in `MockModuleBuilder` the `conf.base_module_repofiles` list
is used as source for the repositories defining platform. We can't
simply use single repository, because there might be fedora.repo
and fedora-update.repo and so on.
- The list of default .repo files for platform are passed using the
`-r` switch in `build_module_locally` `mbs-manager` command.
- The LocalResolver (subclass of DBResolver) is added which is used
to resolve the build dependencies when building modules offline
locally.
- The `MockModuleBuilder` enables the buildrequired modules and
repositories from which they come in the mock config.
With this commit, it is possible to build testmodule locally
without any external infra.
The Koji tag extra options used to be hard-coded and to change them,
we had to release new MBS version.
We do not change them often, but right now fedora-infra is requesting
to use new `mock.new_chroot` option and we need to release new MBS
because of that.
This commit makes such changes easier in the future.
Currently, the Koji tags have properly set the scrmod- prefix, but
the build target still sets module- prefix even for scratch builds.
In this commit, build target has the scrmod- prefix too.
The current code reads the data, converts them to unicode string and
then uses the `len()` of that string as filesize. This is wrong,
because Koji expects filesize to be really number of bytes, not number
of characters.
Therefore, in this commit, the filesize is computed from raw data (bytes).
- Keep scratch module builds in the 'done' state.
- Make koji tagging for scratch modules unique so the same
commit can be resubmitted.
- Use alternate prefix for scratch module build components so they can
be identified later.
- Prevent scratch build components from being reused.
- Assorted code and comment cleanup.
Signed-off-by: Merlin Mathesius <mmathesi@redhat.com>
This commit introduces new to_text_type helper method and calls it
for return value of all mmd.dumps() calls. That way, we always
end up with proper unicode string represntation on both python
major versions.
This commit also adds unicode character to description of all
the yaml files we use in the tests so we can be sure MBS can
handle unicode characters properly.
This might be temporary fix, depending on the result of discussion
at https://github.com/fedora-modularity/libmodulemd/issues/184.
This reverts commit ae79b711d8.
This breaks MBS with python3 and fixes only single occurence of this
issue. We want to fix this in libmodulemd or find a better way how
to fix this to work on both python2 and python3.
We have libmodulemd PR open to address this issue on libmodulemd
level: https://github.com/fedora-modularity/libmodulemd/issues/184.
When encoutering a Windows end of line (^M), io.open and open in Python 3
will convert those to UNIX end of lines by default. When reading logs
to compute the checksum, it's important those new lines aren't converted,
to ensure the checksum is correct. This caused issues in Fedora staging
because when cloning down a repo, the repoSpanner output had Windows end
of lines, and this would end up in build.log. The solution is to just read
it as binary so that Python doesn't perform these conversions.
Fedora 30 now includes rpm-4.14.2.1-4.fc30 with support for
ModularityLabel. We're not using the DistTag anywhere anymore and it
should be safe to drop it at this point.
Signed-off-by: Petr Šabata <contyk@redhat.com>
This commit includes the backport of the changes to `krb_login` in
https://pagure.io/koji/pull-request/1187. This change is required
for our separate threads to use a separate Kerberos context per thread.
In case the module did not contain any RPM, _koji_rpms_in_tag still
tried to call the session.getRPMHeaders with an empty list. This results
in None being returned, which is something _koji_rpms_in_tag did
not count with and failed with traceback when trying to iterate
that None value.
In this commit, the _koji_rpms_in_tag returns an empty list early
if Koji tag does not contain any RPM. Therefore the
session.getRPMHeaders is not called at all in this case, because it
does not make any sense to get RPM Headers when Koji tag does not
contain any RPM.
When using a single Kerberos cache that is shared among threads,
Koji logins start failing because the cache gets corrupt. This uses
the Linux kernel keyring to store a Kerberos cache per MBS thread.
See https://web.mit.edu/kerberos/krb5-1.12/doc/basic/ccache_def.html
Current code presumes SRPM name always matches the RPM name built out of this SRPM
and only includes it together with the main package in this case. This is wrong
assumption, because usually there are multiple binary RPMs built from single SRPM.
This commit fixes that by including the SRPM NEVRA in `non_devel_source_rpms`
no matter what RPM name is.
The test RPMs are reworked in this commit to match the reality better - especially
the relations between SRPM and RPMs. The case with different SRPM name and RPM
name is also included in the reworked test - dhcp-libs binary RPM built from
dhcp SRPM.
MBS calls some read-only Koji APIs which does not require to log into a
session. This patch makes it optional to choose whether to login a
session and use anonymous session properly to call those read-only APIs.
Signed-off-by: Chenxiong Qi <cqi@redhat.com>
