文件压缩

27_day/apilib/Makefile

@@ -21,22 +21,22 @@ GOLIB    = $(TOOLPATH)golib00.exe
 COPY     = copy
 DEL      = del
 
-# デフォルト動作
+#默认动作
 
 default :
 	$(MAKE) apilib.lib
 
-# ファイル生成規則
+#库生成规则
 
 apilib.lib : Makefile $(OBJS_API)
 	$(GOLIB) $(OBJS_API) out:apilib.lib
 
-# 一般規則
+#文件生成规则
 
 %.obj : %.nas Makefile
 	$(NASK) $*.nas $*.obj $*.lst
 
-# コマンド
+#命令
 
 clean :
 	-$(DEL) *.lst

28_day/Makefile

@@ -14,17 +14,19 @@ default :
 
 #文件生成规则
 
-haribote.img : haribote/ipl10.bin haribote/haribote.sys Makefile \
+haribote.img : haribote/ipl20.bin haribote/haribote.sys Makefile \
 		a/a.hrb hello3/hello3.hrb hello4/hello4.hrb hello5/hello5.hrb \
 		winhelo/winhelo.hrb winhelo2/winhelo2.hrb winhelo3/winhelo3.hrb \
 		star1/star1.hrb stars/stars.hrb stars2/stars2.hrb \
 		lines/lines.hrb walk/walk.hrb noodle/noodle.hrb \
 		beepdown/beepdown.hrb color/color.hrb color2/color2.hrb \
-		sosu/sosu.hrb sosu3/sosu3.hrb
+		sosu/sosu.hrb sosu2/sosu2.hrb sosu3/sosu3.hrb \
+		typeipl/typeipl.hrb type/type.hrb iroha/iroha.hrb \
+		chklang/chklang.hrb
 	$(EDIMG)   imgin:../z_tools/fdimg0at.tek \
-		wbinimg src:haribote/ipl10.bin len:512 from:0 to:0 \
+		wbinimg src:haribote/ipl20.bin len:512 from:0 to:0 \
 		copy from:haribote/haribote.sys to:@: \
-		copy from:haribote/ipl10.nas to:@: \
+		copy from:haribote/jp.nas to:@: \
 		copy from:make.bat to:@: \
 		copy from:a/a.hrb to:@: \
 		copy from:hello3/hello3.hrb to:@: \
@@ -43,7 +45,14 @@ haribote.img : haribote/ipl10.bin haribote/haribote.sys Makefile \
 		copy from:color/color.hrb to:@: \
 		copy from:color2/color2.hrb to:@: \
 		copy from:sosu/sosu.hrb to:@: \
+		copy from:sosu2/sosu2.hrb to:@: \
 		copy from:sosu3/sosu3.hrb to:@: \
+		copy from:typeipl/typeipl.hrb to:@: \
+		copy from:type/type.hrb to:@: \
+		copy from:iroha/iroha.hrb to:@: \
+		copy from:chklang/chklang.hrb to:@: \
+		copy from:euc.txt to:@: \
+		copy from:nihongo/nihongo.fnt to:@: \
 		imgout:haribote.img
 
 #命令
@@ -77,7 +86,12 @@ full :
 	$(MAKE) -C color
 	$(MAKE) -C color2
 	$(MAKE) -C sosu
+	$(MAKE) -C sosu2
 	$(MAKE) -C sosu3
+	$(MAKE) -C typeipl
+	$(MAKE) -C type
+	$(MAKE) -C iroha
+	$(MAKE) -C chklang
 	$(MAKE) haribote.img
 
 run_full :
@@ -102,47 +116,57 @@ src_only :
 
 clean_full :
 	$(MAKE) -C haribote		clean
-	$(MAKE) -C apilib		clean
-	$(MAKE) -C a			clean
-	$(MAKE) -C hello3		clean
-	$(MAKE) -C hello4		clean
-	$(MAKE) -C hello5		clean
+	$(MAKE) -C apilib			clean
+	$(MAKE) -C a					clean
+	$(MAKE) -C hello3			clean
+	$(MAKE) -C hello4			clean
+	$(MAKE) -C hello5			clean
 	$(MAKE) -C winhelo		clean
 	$(MAKE) -C winhelo2		clean
 	$(MAKE) -C winhelo3		clean
-	$(MAKE) -C star1		clean
-	$(MAKE) -C stars		clean
-	$(MAKE) -C stars2		clean
-	$(MAKE) -C lines		clean
-	$(MAKE) -C walk			clean
-	$(MAKE) -C noodle		clean
+	$(MAKE) -C star1			clean
+	$(MAKE) -C stars			clean
+	$(MAKE) -C stars2			clean
+	$(MAKE) -C lines			clean
+	$(MAKE) -C walk				clean
+	$(MAKE) -C noodle			clean
 	$(MAKE) -C beepdown		clean
-	$(MAKE) -C color		clean
-	$(MAKE) -C color2		clean
-	$(MAKE) -C sosu			clean
-	$(MAKE) -C sosu3		clean
+	$(MAKE) -C color			clean
+	$(MAKE) -C color2			clean
+	$(MAKE) -C sosu				clean
+	$(MAKE) -C sosu2			clean
+	$(MAKE) -C sosu3			clean
+	$(MAKE) -C typeipl		clean
+	$(MAKE) -C type				clean
+	$(MAKE) -C iroha			clean
+	$(MAKE) -C chklang		clean
 
 src_only_full :
 	$(MAKE) -C haribote		src_only
-	$(MAKE) -C apilib		src_only
-	$(MAKE) -C a			src_only
-	$(MAKE) -C hello3		src_only
-	$(MAKE) -C hello4		src_only
-	$(MAKE) -C hello5		src_only
+	$(MAKE) -C apilib			src_only
+	$(MAKE) -C a					src_only
+	$(MAKE) -C hello3			src_only
+	$(MAKE) -C hello4			src_only
+	$(MAKE) -C hello5			src_only
 	$(MAKE) -C winhelo		src_only
 	$(MAKE) -C winhelo2		src_only
 	$(MAKE) -C winhelo3		src_only
-	$(MAKE) -C star1		src_only
-	$(MAKE) -C stars		src_only
-	$(MAKE) -C stars2		src_only
-	$(MAKE) -C lines		src_only
-	$(MAKE) -C walk			src_only
-	$(MAKE) -C noodle		src_only
+	$(MAKE) -C star1			src_only
+	$(MAKE) -C stars			src_only
+	$(MAKE) -C stars2			src_only
+	$(MAKE) -C lines			src_only
+	$(MAKE) -C walk				src_only
+	$(MAKE) -C noodle			src_only
 	$(MAKE) -C beepdown		src_only
-	$(MAKE) -C color		src_only
-	$(MAKE) -C color2		src_only
-	$(MAKE) -C sosu			src_only
-	$(MAKE) -C sosu3		src_only
+	$(MAKE) -C color			src_only
+	$(MAKE) -C color2			src_only
+	$(MAKE) -C sosu				src_only
+	$(MAKE) -C sosu2			src_only
+	$(MAKE) -C sosu3			src_only
+	$(MAKE) -C typeipl		src_only
+	$(MAKE) -C type				src_only
+	$(MAKE) -C iroha			src_only
+	$(MAKE) -C chklang		src_only
 	-$(DEL) haribote.img
 
 refresh :

28_day/apilib.h

@@ -18,3 +18,10 @@ void api_inittimer(int timer, int data);
 void api_settimer(int timer, int time);
 void api_freetimer(int timer);
 void api_beep(int tone);
+int api_fopen(char *fname);
+void api_fclose(int fhandle);
+void api_fseek(int fhandle, int offset, int mode);
+int api_fsize(int fhandle, int mode);
+int api_fread(char *buf, int maxsize, int fhandle);
+int api_cmdline(char *buf, int maxsize);
+int api_getlang(void);

28_day/apilib/Makefile

@@ -1,7 +1,8 @@
 OBJS_API =	api001.obj api002.obj api003.obj api004.obj api005.obj api006.obj \
 			api007.obj api008.obj api009.obj api010.obj api011.obj api012.obj \
 			api013.obj api014.obj api015.obj api016.obj api017.obj api018.obj \
-			api019.obj api020.obj
+			api019.obj api020.obj api021.obj api022.obj api023.obj api024.obj \
+			api025.obj api026.obj api027.obj alloca.obj
 
 TOOLPATH = ../../z_tools/
 INCPATH  = ../../z_tools/haribote/
@@ -21,22 +22,22 @@ GOLIB    = $(TOOLPATH)golib00.exe
 COPY     = copy
 DEL      = del
 
-# デフォルト動作
+#默认动作
 
 default :
 	$(MAKE) apilib.lib
 
-# ファイル生成規則
+#库生成规则
 
 apilib.lib : Makefile $(OBJS_API)
 	$(GOLIB) $(OBJS_API) out:apilib.lib
 
-# 一般規則
+#文件生成规则
 
 %.obj : %.nas Makefile
 	$(NASK) $*.nas $*.obj $*.lst
 
-# コマンド
+#命令
 
 clean :
 	-$(DEL) *.lst

28_day/apilib/alloca.nas

@@ -0,0 +1,13 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "alloca.nas"]
+
+		GLOBAL	__alloca
+
+[SECTION .text]
+
+__alloca:
+		ADD		EAX,-4
+		SUB		ESP,EAX
+		JMP		DWORD [ESP+EAX]		; 代替RET

28_day/apilib/api021.nas

@@ -0,0 +1,16 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api021.nas"]
+
+		GLOBAL	_api_fopen
+
+[SECTION .text]
+
+_api_fopen:			; int api_fopen(char *fname);
+		PUSH	EBX
+		MOV		EDX,21
+		MOV		EBX,[ESP+8]			; fname
+		INT		0x40
+		POP		EBX
+		RET

28_day/apilib/api022.nas

@@ -0,0 +1,14 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api022.nas"]
+
+		GLOBAL	_api_fclose
+
+[SECTION .text]
+
+_api_fclose:		; void api_fclose(int fhandle);
+		MOV		EDX,22
+		MOV		EAX,[ESP+4]			; fhandle
+		INT		0x40
+		RET

28_day/apilib/api023.nas

@@ -0,0 +1,18 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api023.nas"]
+
+		GLOBAL	_api_fseek
+
+[SECTION .text]
+
+_api_fseek:			; void api_fseek(int fhandle, int offset, int mode);
+		PUSH	EBX
+		MOV		EDX,23
+		MOV		EAX,[ESP+8]			; fhandle
+		MOV		ECX,[ESP+16]		; mode
+		MOV		EBX,[ESP+12]		; offset
+		INT		0x40
+		POP		EBX
+		RET

28_day/apilib/api024.nas

@@ -0,0 +1,15 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api024.nas"]
+
+		GLOBAL	_api_fsize
+
+[SECTION .text]
+
+_api_fsize:			; int api_fsize(int fhandle, int mode);
+		MOV		EDX,24
+		MOV		EAX,[ESP+4]			; fhandle
+		MOV		ECX,[ESP+8]			; mode
+		INT		0x40
+		RET

28_day/apilib/api025.nas

@@ -0,0 +1,18 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api025.nas"]
+
+		GLOBAL	_api_fread
+
+[SECTION .text]
+
+_api_fread:			; int api_fread(char *buf, int maxsize, int fhandle);
+		PUSH	EBX
+		MOV		EDX,25
+		MOV		EAX,[ESP+16]		; fhandle
+		MOV		ECX,[ESP+12]		; maxsize
+		MOV		EBX,[ESP+8]			; buf
+		INT		0x40
+		POP		EBX
+		RET

28_day/apilib/api026.nas

@@ -0,0 +1,17 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api026.nas"]
+
+		GLOBAL	_api_cmdline
+
+[SECTION .text]
+
+_api_cmdline:		; int api_cmdline(char *buf, int maxsize);
+		PUSH	EBX
+		MOV		EDX,26
+		MOV		ECX,[ESP+12]		; maxsize
+		MOV		EBX,[ESP+8]			; buf
+		INT		0x40
+		POP		EBX
+		RET

28_day/apilib/api027.nas

@@ -0,0 +1,13 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api027.nas"]
+
+		GLOBAL	_api_getlang
+
+[SECTION .text]
+
+_api_getlang:		; int api_getlang(void);
+		MOV		EDX,27
+		INT		0x40
+		RET

28_day/chklang/!cons_9x.bat

@@ -0,0 +1 @@
+command

28_day/chklang/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

28_day/chklang/Makefile

@@ -0,0 +1,5 @@
+APP      = chklang
+STACK    = 1k
+MALLOC   = 0k
+
+include ../app_make.txt

28_day/chklang/chklang.c

@@ -0,0 +1,24 @@
+#include "apilib.h"
+
+void HariMain(void)
+{
+	int langmode = api_getlang();
+	static char s1[23] = {	/* 日本語シフトJISモード（日文Shift-JIS模式）*/
+		0x93, 0xfa, 0x96, 0x7b, 0x8c, 0xea, 0x83, 0x56, 0x83, 0x74, 0x83, 0x67,
+		0x4a, 0x49, 0x53, 0x83, 0x82, 0x81, 0x5b, 0x83, 0x68, 0x0a, 0x00
+	};
+	static char s2[17] = {	/*日本語EUCモード（日文EUC模式）*/
+		0xc6, 0xfc, 0xcb, 0xdc, 0xb8, 0xec, 0x45, 0x55, 0x43, 0xa5, 0xe2, 0xa1,
+		0xbc, 0xa5, 0xc9, 0x0a, 0x00
+	};
+	if (langmode == 0) {
+		api_putstr0("English ASCII mode\n");
+	}
+	if (langmode == 1) {
+		api_putstr0(s1);
+	}
+	if (langmode == 2) {
+		api_putstr0(s2);
+	}
+	api_end();
+}

28_day/chklang/make.bat

@@ -0,0 +1 @@
+..\..\z_tools\make.exe %1 %2 %3 %4 %5 %6 %7 %8 %9

28_day/euc.txt

@@ -0,0 +1 @@
+日本語EUCで書いてみたよー

28_day/haribote/Makefile

@@ -23,7 +23,7 @@ DEL      = del
 #默认动作
 
 default :
-	$(MAKE) ipl10.bin
+	$(MAKE) ipl20.bin
 	$(MAKE) haribote.sys
 
 # 镜像文件生成
@@ -31,6 +31,9 @@ default :
 ipl10.bin : ipl10.nas Makefile
 	$(NASK) ipl10.nas ipl10.bin ipl10.lst
 
+ipl20.bin : ipl20.nas Makefile
+	$(NASK) ipl20.nas ipl20.bin ipl20.lst
+
 asmhead.bin : asmhead.nas Makefile
 	$(NASK) asmhead.nas asmhead.bin asmhead.lst
 
@@ -76,4 +79,5 @@ clean :
 src_only :
 	$(MAKE) clean
 	-$(DEL) ipl10.bin
+	-$(DEL) ipl20.bin
 	-$(DEL) haribote.sys

28_day/haribote/bootpack.c

@@ -47,6 +47,10 @@ void HariMain(void)
 	int key_shift = 0, key_leds = (binfo->leds >> 4) & 7, keycmd_wait = -1;
 	int j, x, y, mmx = -1, mmy = -1, mmx2 = 0;
 	struct SHEET *sht = 0, *key_win, *sht2;
+	int *fat;
+	unsigned char *nihongo;
+	struct FILEINFO *finfo;
+	extern char hankaku[4096];
 
 	init_gdtidt();
 	init_pic();
@@ -71,6 +75,7 @@ void HariMain(void)
 	fifo.task = task_a;
 	task_run(task_a, 1, 2);
 	*((int *) 0x0fe4) = (int) shtctl;
+	task_a->langmode = 0;
 
 	/* sht_back */
 	sht_back  = sheet_alloc(shtctl);
@@ -96,10 +101,28 @@ void HariMain(void)
 	sheet_updown(sht_mouse, 2);
 	keywin_on(key_win);
 
-	/*为了避免和键盘当前状态冲突，在一开始先进行设置*/
+	/* 为了避免和键盘当前状态冲突，在一开始先进行设置 */
 	fifo32_put(&keycmd, KEYCMD_LED);
 	fifo32_put(&keycmd, key_leds);
 
+	/* 载入nihongo.fnt */
+	nihongo = (unsigned char *) memman_alloc_4k(memman, 16 * 256 + 32 * 94 * 47);
+	fat = (int *) memman_alloc_4k(memman, 4 * 2880);
+	file_readfat(fat, (unsigned char *) (ADR_DISKIMG + 0x000200));
+	finfo = file_search("nihongo.fnt", (struct FILEINFO *) (ADR_DISKIMG + 0x002600), 224);
+	if (finfo != 0) {
+		file_loadfile(finfo->clustno, finfo->size, nihongo, fat, (char *) (ADR_DISKIMG + 0x003e00));
+	} else {
+		for (i = 0; i < 16 * 256; i++) {
+			nihongo[i] = hankaku[i]; /* 没有字库，半角部分直接复制英文字库 */
+		}
+		for (i = 16 * 256; i < 16 * 256 + 32 * 94 * 47; i++) {
+			nihongo[i] = 0xff; /* 没有字库，全角部分以0xff填充 */
+		}
+	}
+	*((int *) 0x0fe8) = (int) nihongo;
+	memman_free_4k(memman, (int) fat, 4 * 2880);
+
 	for (;;) {
 		if (fifo32_status(&keycmd) > 0 && keycmd_wait < 0) {
 			/* 如果存在向键盘控制器发送的数据，则发送它 */

28_day/haribote/bootpack.h

@@ -214,6 +214,10 @@ struct TASK {
 	struct SEGMENT_DESCRIPTOR ldt[2];
 	struct CONSOLE *cons;
 	int ds_base, cons_stack;
+	struct FILEHANDLE *fhandle;
+	int *fat;
+	char *cmdline;
+	unsigned char langmode, langbyte1;
 };
 struct TASKLEVEL {
 	int running; /*正在运行的任务数量*/
@@ -248,6 +252,11 @@ struct CONSOLE {
 	int cur_x, cur_y, cur_c;
 	struct TIMER *timer;
 };
+struct FILEHANDLE {
+	char *buf;
+	int size;
+	int pos;
+};
 void console_task(struct SHEET *sheet, int memtotal);
 void cons_putchar(struct CONSOLE *cons, int chr, char move);
 void cons_newline(struct CONSOLE *cons);
@@ -257,10 +266,10 @@ void cons_runcmd(char *cmdline, struct CONSOLE *cons, int *fat, int memtotal);
 void cmd_mem(struct CONSOLE *cons, int memtotal);
 void cmd_cls(struct CONSOLE *cons);
 void cmd_dir(struct CONSOLE *cons);
-void cmd_type(struct CONSOLE *cons, int *fat, char *cmdline);
 void cmd_exit(struct CONSOLE *cons, int *fat);
 void cmd_start(struct CONSOLE *cons, char *cmdline, int memtotal);
 void cmd_ncst(struct CONSOLE *cons, char *cmdline, int memtotal);
+void cmd_langmode(struct CONSOLE *cons, char *cmdline);
 int cmd_app(struct CONSOLE *cons, int *fat, char *cmdline);
 int *hrb_api(int edi, int esi, int ebp, int esp, int ebx, int edx, int ecx, int eax);
 int *inthandler0d(int *esp);

28_day/haribote/console.c

@@ -9,13 +9,17 @@ void console_task(struct SHEET *sheet, int memtotal)
 	struct TASK *task = task_now();
 	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
 	int i, *fat = (int *) memman_alloc_4k(memman, 4 * 2880);
+	struct FILEHANDLE fhandle[8];
 	struct CONSOLE cons;
 	char cmdline[30];
+	unsigned char *nihongo = (char *) *((int *) 0x0fe8);
+
 	cons.sht = sheet;
 	cons.cur_x =  8;
 	cons.cur_y = 28;
 	cons.cur_c = -1;
 	task->cons = &cons;
+	task->cmdline = cmdline;
 
 	if (cons.sht != 0) {
 		cons.timer = timer_alloc();
@@ -23,6 +27,17 @@ void console_task(struct SHEET *sheet, int memtotal)
 		timer_settime(cons.timer, 50);
 	}
 	file_readfat(fat, (unsigned char *) (ADR_DISKIMG + 0x000200));
+	for (i = 0; i < 8; i++) {
+		fhandle[i].buf = 0; /*未使用标记*/
+	}
+	task->fhandle = fhandle;
+	task->fat = fat;
+	if (nihongo[4096] != 0xff) {	 /* 是否载入了字库？*/
+		task->langmode = 1;
+	} else {
+		task->langmode = 0;
+	}
+	task->langbyte1 = 0;
 
 	/*显示提示符*/
 	cons_putchar(&cons, '>', 1);
@@ -144,6 +159,7 @@ void cons_newline(struct CONSOLE *cons)
 {
 	int x, y;
 	struct SHEET *sheet = cons->sht;
+	struct TASK *task = task_now();
 	if (cons->cur_y < 28 + 112) {
 		cons->cur_y += 16; /*到下一行*/
 	} else {
@@ -163,6 +179,9 @@ void cons_newline(struct CONSOLE *cons)
 		}
 	}
 	cons->cur_x = 8;
+	if (task->langmode == 1 && task->langbyte1 != 0) {
+		cons->cur_x += 8;
+	}
 	return;
 }
 
@@ -191,15 +210,15 @@ void cons_runcmd(char *cmdline, struct CONSOLE *cons, int *fat, int memtotal)
 		cmd_cls(cons);
 	} else if ((strcmp(cmdline, "dir") == 0 || strcmp(cmdline, "ls") == 0) && cons->sht != 0) {
 		cmd_dir(cons);
-	} else if (strncmp(cmdline, "type ", 5) == 0 && cons->sht != 0) {
-		cmd_type(cons, fat, cmdline);
 	} else if (strcmp(cmdline, "exit") == 0) {
 		cmd_exit(cons, fat);
 	} else if (strncmp(cmdline, "start ", 6) == 0) {
 		cmd_start(cons, cmdline, memtotal);
 	} else if (strncmp(cmdline, "ncst ", 5) == 0) {
 		cmd_ncst(cons, cmdline, memtotal);
-	} else if (cmdline[0] != 0) {
+	} else if (strncmp(cmdline, "langmode ", 9) == 0) {
+		cmd_langmode(cons, cmdline);
+	}else if (cmdline[0] != 0) {
 		if (cmd_app(cons, fat, cmdline) == 0) {
 			/*不是命令，不是应用程序，也不是空行*/
 			cons_putstr0(cons, "Bad command.\n\n");
@@ -257,25 +276,6 @@ void cmd_dir(struct CONSOLE *cons)
 	return;
 }
 
-void cmd_type(struct CONSOLE *cons, int *fat, char *cmdline)
-{
-	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
-	struct FILEINFO *finfo = file_search(cmdline + 5, (struct FILEINFO *) (ADR_DISKIMG + 0x002600), 224);
-	char *p;
-	if (finfo != 0) {
-		/*找到文件的情况*/
-		p = (char *) memman_alloc_4k(memman, finfo->size);
-		file_loadfile(finfo->clustno, finfo->size, p, fat, (char *) (ADR_DISKIMG + 0x003e00));
-		cons_putstr1(cons, p, finfo->size);
-		memman_free_4k(memman, (int) p, finfo->size);
-	} else {
-		/*没有找到文件的情况*/
-		cons_putstr0(cons, "File not found.\n");
-	}
-	cons_newline(cons);
-	return;
-}
-
 void cmd_exit(struct CONSOLE *cons, int *fat)
 {
 	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
@@ -330,6 +330,19 @@ void cmd_ncst(struct CONSOLE *cons, char *cmdline, int memtotal)
 	return;
 }
 
+void cmd_langmode(struct CONSOLE *cons, char *cmdline)
+{
+	struct TASK *task = task_now();
+	unsigned char mode = cmdline[9] - '0';
+	if (mode <= 2) {
+		task->langmode = mode;
+	} else {
+		cons_putstr0(cons, "mode number error.\n");
+	}
+	cons_newline(cons);
+	return;
+}
+
 int cmd_app(struct CONSOLE *cons, int *fat, char *cmdline)
 {
 	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
@@ -387,8 +400,15 @@ int cmd_app(struct CONSOLE *cons, int *fat, char *cmdline)
 					sheet_free(sht); /*关闭*/
 				}
 			}
+			for (i = 0; i < 8; i++) { /*将未关闭的文件关闭*/ 
+				if (task->fhandle[i].buf != 0) {
+					memman_free_4k(memman, (int) task->fhandle[i].buf, task->fhandle[i].size);
+					task->fhandle[i].buf = 0;
+				}
+			}
 			timer_cancelall(&task->fifo);
 			memman_free_4k(memman, (int) q, segsiz);
+			task->langbyte1 = 0;
 		} else {
 			cons_putstr0(cons, ".hrb file format error.\n");
 		}
@@ -413,6 +433,9 @@ int *hrb_api(int edi, int esi, int ebp, int esp, int ebx, int edx, int ecx, int
 		/* reg[0] : EDI,   reg[1] : ESI,   reg[2] : EBP,   reg[3] : ESP */
 		/* reg[4] : EBX,   reg[5] : EDX,   reg[6] : ECX,   reg[7] : EAX */
 	int i;
+	struct FILEINFO *finfo;
+	struct FILEHANDLE *fh;
+	struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR;
 
 	if (edx == 1) {
 		cons_putchar(cons, eax & 0xff, 1);
@@ -528,6 +551,77 @@ int *hrb_api(int edi, int esi, int ebp, int esp, int ebx, int edx, int ecx, int
 			i = io_in8(0x61);
 			io_out8(0x61, (i | 0x03) & 0x0f);
 		}
+	} else if (edx == 21) {
+		for (i = 0; i < 8; i++) {
+			if (task->fhandle[i].buf == 0) {
+				break;
+			}
+		}
+		fh = &task->fhandle[i];
+		reg[7] = 0;
+		if (i < 8) {
+			finfo = file_search((char *) ebx + ds_base, (struct FILEINFO *) (ADR_DISKIMG + 0x002600), 224);
+			if (finfo != 0) {
+				reg[7] = (int) fh;
+				fh->buf = (char *) memman_alloc_4k(memman, finfo->size);
+				fh->size = finfo->size;
+				fh->pos = 0;
+				file_loadfile(finfo->clustno, finfo->size, fh->buf, task->fat, (char *) (ADR_DISKIMG + 0x003e00));
+			}
+		}
+	} else if (edx == 22) {
+		fh = (struct FILEHANDLE *) eax;
+		memman_free_4k(memman, (int) fh->buf, fh->size);
+		fh->buf = 0;
+	} else if (edx == 23) {
+		fh = (struct FILEHANDLE *) eax;
+		if (ecx == 0) {
+			fh->pos = ebx;
+		} else if (ecx == 1) {
+			fh->pos += ebx;
+		} else if (ecx == 2) {
+			fh->pos = fh->size + ebx;
+		}
+		if (fh->pos < 0) {
+			fh->pos = 0;
+		}
+		if (fh->pos > fh->size) {
+			fh->pos = fh->size;
+		}
+	} else if (edx == 24) {
+		fh = (struct FILEHANDLE *) eax;
+		if (ecx == 0) {
+			reg[7] = fh->size;
+		} else if (ecx == 1) {
+			reg[7] = fh->pos;
+		} else if (ecx == 2) {
+			reg[7] = fh->pos - fh->size;
+		}
+	} else if (edx == 25) {
+		fh = (struct FILEHANDLE *) eax;
+		for (i = 0; i < ecx; i++) {
+			if (fh->pos == fh->size) {
+				break;
+			}
+			*((char *) ebx + ds_base + i) = fh->buf[fh->pos];
+			fh->pos++;
+		}
+		reg[7] = i;
+	} else if (edx == 26) {
+		i = 0;
+		for (;;) {
+			*((char *) ebx + ds_base + i) =  task->cmdline[i];
+			if (task->cmdline[i] == 0) {
+				break;
+			}
+			if (i >= ecx) {
+				break;
+			}
+			i++;
+		}
+		reg[7] = i;
+	} else if (edx == 27) {
+		reg[7] = task->langmode;
 	}
 	return 0;
 }

28_day/haribote/graphic.c

@@ -107,10 +107,64 @@ void putfont8(char *vram, int xsize, int x, int y, char c, char *font)
 void putfonts8_asc(char *vram, int xsize, int x, int y, char c, unsigned char *s)
 {
 	extern char hankaku[4096];
-	/* C语言中，字符串都是以0x00结尾 */
-	for (; *s != 0x00; s++) {
-		putfont8(vram, xsize, x, y, c, hankaku + *s * 16);
-		x += 8;
+	struct TASK *task = task_now();
+	char *nihongo = (char *) *((int *) 0x0fe8), *font;
+	int k, t;
+
+	if (task->langmode == 0) {
+		for (; *s != 0x00; s++) {
+			putfont8(vram, xsize, x, y, c, hankaku + *s * 16);
+			x += 8;
+		}
+	}
+	if (task->langmode == 1) {
+		for (; *s != 0x00; s++) {
+			if (task->langbyte1 == 0) {
+				if ((0x81 <= *s && *s <= 0x9f) || (0xe0 <= *s && *s <= 0xfc)) {
+					task->langbyte1 = *s;
+				} else {
+					putfont8(vram, xsize, x, y, c, nihongo + *s * 16);
+				}
+			} else {
+				if (0x81 <= task->langbyte1 && task->langbyte1 <= 0x9f) {
+					k = (task->langbyte1 - 0x81) * 2;
+				} else {
+					k = (task->langbyte1 - 0xe0) * 2 + 62;
+				}
+				if (0x40 <= *s && *s <= 0x7e) {
+					t = *s - 0x40;
+				} else if (0x80 <= *s && *s <= 0x9e) {
+					t = *s - 0x80 + 63;
+				} else {
+					t = *s - 0x9f;
+					k++;
+				}
+				task->langbyte1 = 0;
+				font = nihongo + 256 * 16 + (k * 94 + t) * 32;
+				putfont8(vram, xsize, x - 8, y, c, font     );	/* 左半部分 */
+				putfont8(vram, xsize, x    , y, c, font + 16);	/* 右半部分 */
+			}
+			x += 8;
+		}
+	}
+	if (task->langmode == 2) {
+		for (; *s != 0x00; s++) {
+			if (task->langbyte1 == 0) {
+				if (0x81 <= *s && *s <= 0xfe) {
+					task->langbyte1 = *s;
+				} else {
+					putfont8(vram, xsize, x, y, c, nihongo + *s * 16);
+				}
+			} else {
+				k = task->langbyte1 - 0xa1;
+				t = *s - 0xa1;
+				task->langbyte1 = 0;
+				font = nihongo + 256 * 16 + (k * 94 + t) * 32;
+				putfont8(vram, xsize, x - 8, y, c, font     );	/* 左半部分 */
+				putfont8(vram, xsize, x    , y, c, font + 16);	/* 右半部分 */
+			}
+			x += 8;
+		}
 	}
 	return;
 }

28_day/haribote/ipl20.nas

@@ -0,0 +1,109 @@
+; haribote-ipl
+; TAB=4
+
+CYLS	EQU		20				; 声明CYLS=20
+
+		ORG		0x7c00			; 指明程序装载地址
+
+; 标准FAT12格式软盘专用的代码 Stand FAT12 format floppy code
+
+		JMP		entry
+		DB		0x90
+		DB		"HARIBOTE"		; 启动扇区名称（8字节）
+		DW		512				; 每个扇区（sector）大小（必须512字节）
+		DB		1				; 簇（cluster）大小（必须为1个扇区）
+		DW		1				; FAT起始位置（一般为第一个扇区）
+		DB		2				; FAT个数（必须为2）
+		DW		224				; 根目录大小（一般为224项）
+		DW		2880			; 该磁盘大小（必须为2880扇区1440*1024/512）
+		DB		0xf0			; 磁盘类型（必须为0xf0）
+		DW		9				; FAT的长度（必??9扇区）
+		DW		18				; 一个磁道（track）有几个扇区（必须为18）
+		DW		2				; 磁头数（必??2）
+		DD		0				; 不使用分区，必须是0
+		DD		2880			; 重写一次磁盘大小
+		DB		0,0,0x29		; 意义不明（固定）
+		DD		0xffffffff		; （可能是）卷标号码
+		DB		"HARIBOTEOS "	; 磁盘的名称（必须为11字?，不足填空格）
+		DB		"FAT12   "		; 磁盘格式名称（必??8字?，不足填空格）
+		RESB	18				; 先空出18字节
+
+; 程序主体
+
+entry:
+		MOV		AX,0			; 初始化寄存器
+		MOV		SS,AX
+		MOV		SP,0x7c00
+		MOV		DS,AX
+
+; 读取磁盘
+
+		MOV		AX,0x0820
+		MOV		ES,AX
+		MOV		CH,0			; 柱面0
+		MOV		DH,0			; 磁头0
+		MOV		CL,2			; 扇区2
+
+readloop:
+		MOV		SI,0			; 记录失败次数寄存器
+
+retry:
+		MOV		AH,0x02			; AH=0x02 : 读入磁盘
+		MOV		AL,1			; 1个扇区
+		MOV		BX,0
+		MOV		DL,0x00			; A驱动器
+		INT		0x13			; 调用磁盘BIOS
+		JNC		next			; 没出错则跳转到fin
+		ADD		SI,1			; 往SI加1
+		CMP		SI,5			; 比较SI与5
+		JAE		error			; SI >= 5 跳转到error
+		MOV		AH,0x00
+		MOV		DL,0x00			; A驱动器
+		INT		0x13			; 重置驱动器
+		JMP		retry
+next:
+		MOV		AX,ES			; 把内存地址后移0x200（512/16十六进制转换）
+		ADD		AX,0x0020
+		MOV		ES,AX			; ADD ES,0x020因为没有ADD ES，只能通过AX进行
+		ADD		CL,1			; 往CL里面加1
+		CMP		CL,18			; 比较CL与18
+		JBE		readloop		; CL <= 18 跳转到readloop
+		MOV		CL,1
+		ADD		DH,1
+		CMP		DH,2
+		JB		readloop		; DH < 2 跳转到readloop
+		MOV		DH,0
+		ADD		CH,1
+		CMP		CH,CYLS
+		JB		readloop		; CH < CYLS 跳转到readloop
+
+; 读取完毕，跳转到haribote.sys执行！
+		MOV		[0x0ff0],CH		; IPLがどこまで読んだのかをメモ
+		JMP		0xc200
+
+error:
+		MOV		SI,msg
+
+putloop:
+		MOV		AL,[SI]
+		ADD		SI,1			; 给SI加1
+		CMP		AL,0
+		JE		fin
+		MOV		AH,0x0e			; 显示一个文字
+		MOV		BX,15			; 指定字符颜色
+		INT		0x10			; 调用显卡BIOS
+		JMP		putloop
+
+fin:
+		HLT						; 让CPU停止，等待指令
+		JMP		fin				; 无限循环
+
+msg:
+		DB		0x0a, 0x0a		; 换行两次
+		DB		"load error"
+		DB		0x0a			; 换行
+		DB		0
+
+		RESB	0x7dfe-$		; 填写0x00直到0x001fe
+
+		DB		0x55, 0xaa

28_day/haribote/jp.nas

@@ -0,0 +1,107 @@
+; haribote-ipl
+; TAB=4
+
+CYLS	EQU		10				; どこまで読み込むか
+
+		ORG		0x7c00			; このプログラムがどこに読み込まれるのか
+
+; 以下は標準的なFAT12フォーマットフロッピーディスクのための記述
+
+		JMP		entry
+		DB		0x90
+		DB		"HARIBOTE"		; ブートセクタの名前を自由に書いてよい（8バイト）
+		DW		512				; 1セクタの大きさ（512にしなければいけない）
+		DB		1				; クラスタの大きさ（1セクタにしなければいけない）
+		DW		1				; FATがどこから始まるか（普通は1セクタ目からにする）
+		DB		2				; FATの個数（2にしなければいけない）
+		DW		224				; ルートディレクトリ領域の大きさ（普通は224エントリにする）
+		DW		2880			; このドライブの大きさ（2880セクタにしなければいけない）
+		DB		0xf0			; メディアのタイプ（0xf0にしなければいけない）
+		DW		9				; FAT領域の長さ（9セクタにしなければいけない）
+		DW		18				; 1トラックにいくつのセクタがあるか（18にしなければいけない）
+		DW		2				; ヘッドの数（2にしなければいけない）
+		DD		0				; パーティションを使ってないのでここは必ず0
+		DD		2880			; このドライブ大きさをもう一度書く
+		DB		0,0,0x29		; よくわからないけどこの値にしておくといいらしい
+		DD		0xffffffff		; たぶんボリュームシリアル番号
+		DB		"HARIBOTEOS "	; ディスクの名前（11バイト）
+		DB		"FAT12   "		; フォーマットの名前（8バイト）
+		RESB	18				; とりあえず18バイトあけておく
+
+; プログラム本体
+
+entry:
+		MOV		AX,0			; レジスタ初期化
+		MOV		SS,AX
+		MOV		SP,0x7c00
+		MOV		DS,AX
+
+; ディスクを読む
+
+		MOV		AX,0x0820
+		MOV		ES,AX
+		MOV		CH,0			; シリンダ0
+		MOV		DH,0			; ヘッド0
+		MOV		CL,2			; セクタ2
+readloop:
+		MOV		SI,0			; 失敗回数を数えるレジスタ
+retry:
+		MOV		AH,0x02			; AH=0x02 : ディスク読み込み
+		MOV		AL,1			; 1セクタ
+		MOV		BX,0
+		MOV		DL,0x00			; Aドライブ
+		INT		0x13			; ディスクBIOS呼び出し
+		JNC		next			; エラーがおきなければnextへ
+		ADD		SI,1			; SIに1を足す
+		CMP		SI,5			; SIと5を比較
+		JAE		error			; SI >= 5 だったらerrorへ
+		MOV		AH,0x00
+		MOV		DL,0x00			; Aドライブ
+		INT		0x13			; ドライブのリセット
+		JMP		retry
+next:
+		MOV		AX,ES			; アドレスを0x200進める
+		ADD		AX,0x0020
+		MOV		ES,AX			; ADD ES,0x020 という命令がないのでこうしている
+		ADD		CL,1			; CLに1を足す
+		CMP		CL,18			; CLと18を比較
+		JBE		readloop		; CL <= 18 だったらreadloopへ
+		MOV		CL,1
+		ADD		DH,1
+		CMP		DH,2
+		JB		readloop		; DH < 2 だったらreadloopへ
+		MOV		DH,0
+		ADD		CH,1
+		CMP		CH,CYLS
+		JB		readloop		; CH < CYLS だったらreadloopへ
+
+; 読み終わったのでharibote.sysを実行だ！
+
+		MOV		[0x0ff0],CH		; IPLがどこまで読んだのかをメモ
+		JMP		0xc200
+
+error:
+		MOV		AX,0
+		MOV		ES,AX
+		MOV		SI,msg
+putloop:
+		MOV		AL,[SI]
+		ADD		SI,1			; SIに1を足す
+		CMP		AL,0
+		JE		fin
+		MOV		AH,0x0e			; 一文字表示ファンクション
+		MOV		BX,15			; カラーコード
+		INT		0x10			; ビデオBIOS呼び出し
+		JMP		putloop
+fin:
+		HLT						; 何かあるまでCPUを停止させる
+		JMP		fin				; 無限ループ
+msg:
+		DB		0x0a, 0x0a		; 改行を2つ
+		DB		"load error"
+		DB		0x0a			; 改行
+		DB		0
+
+		RESB	0x7dfe-$		; 0x7dfeまでを0x00で埋める命令
+
+		DB		0x55, 0xaa

28_day/iroha/!cons_9x.bat

@@ -0,0 +1 @@
+command

28_day/iroha/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

28_day/iroha/Makefile

@@ -0,0 +1,5 @@
+APP      = iroha
+STACK    = 1k
+MALLOC   = 0k
+
+include ../app_make.txt

28_day/iroha/iroha.c

@@ -0,0 +1,9 @@
+#include "apilib.h"
+
+void HariMain(void)
+{
+	static char s[9] = { 0xb2, 0xdb, 0xca, 0xc6, 0xce, 0xcd, 0xc4, 0x0a, 0x00 };
+	/*半角片假名イロハニホヘト的字符编码+换行+0 */
+	api_putstr0(s);
+	api_end();
+}

28_day/iroha/make.bat

@@ -0,0 +1 @@
+..\..\z_tools\make.exe %1 %2 %3 %4 %5 %6 %7 %8 %9

28_day/type/!cons_9x.bat

@@ -0,0 +1 @@
+command

28_day/type/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

28_day/type/Makefile

@@ -0,0 +1,5 @@
+APP      = type
+STACK    = 1k
+MALLOC   = 0k
+
+include ../app_make.txt

28_day/type/make.bat

@@ -0,0 +1 @@
+..\..\z_tools\make.exe %1 %2 %3 %4 %5 %6 %7 %8 %9

28_day/type/type.c

@@ -0,0 +1,23 @@
+#include "apilib.h"
+
+void HariMain(void)
+{
+	int fh;
+	char c, cmdline[30], *p;
+
+	api_cmdline(cmdline, 30);
+	for (p = cmdline; *p > ' '; p++) { }	/*跳过之前的内容，直到遇到空格*/
+	for (; *p == ' '; p++) { }	/*跳过空格*/
+	fh = api_fopen(p);
+	if (fh != 0) {
+		for (;;) {
+			if (api_fread(&c, 1, fh) == 0) {
+				break;
+			}
+			api_putchar(c);
+		}
+	} else {
+		api_putstr0("File not found.\n");
+	}
+	api_end();
+}

28_day/typeipl/!cons_9x.bat

@@ -0,0 +1 @@
+command

28_day/typeipl/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

28_day/typeipl/Makefile

@@ -0,0 +1,5 @@
+APP      = typeipl
+STACK    = 1k
+MALLOC   = 0k
+
+include ../app_make.txt

28_day/typeipl/make.bat

@@ -0,0 +1 @@
+..\..\z_tools\make.exe %1 %2 %3 %4 %5 %6 %7 %8 %9

28_day/typeipl/typeipl.c

@@ -0,0 +1,17 @@
+#include "apilib.h"
+
+void HariMain(void)
+{
+	int fh;
+	char c;
+	fh = api_fopen("ipl10.nas");
+	if (fh != 0) {
+		for (;;) {
+			if (api_fread(&c, 1, fh) == 0) {
+				break;
+			}
+			api_putchar(c);
+		}
+	}
+	api_end();
+}

28_day/winhelo/Makefile

@@ -1,5 +1,5 @@
 APP      = winhelo
-STACK    = 1k
+STACK    = 8k
 MALLOC   = 0k
 
 include ../app_make.txt

28_day/winhelo/winhelo.c

@@ -1,10 +1,10 @@
 #include "apilib.h"
 
-char buf[150 * 50];
-
 void HariMain(void)
 {
 	int win;
+	char buf[150 * 50];
+
 	win = api_openwin(buf, 150, 50, -1, "hello");
 	for (;;) {
 		if (api_getkey(1) == 0x0a) {

28_day/winhelo2/Makefile

@@ -1,5 +1,5 @@
 APP      = winhelo2
-STACK    = 1k
+STACK    = 8k
 MALLOC   = 0k
 
 include ../app_make.txt

28_day/winhelo2/winhelo2.c

@@ -1,10 +1,10 @@
 #include "apilib.h"
 
-char buf[150 * 50];
-
 void HariMain(void)
 {
 	int win;
+	char buf[150 * 50];
+	
 	win = api_openwin(buf, 150, 50, -1, "hello");
 	api_boxfilwin(win,  8, 36, 141, 43, 3); /*黄色*/
 	api_putstrwin(win, 28, 28, 0 /*黑色*/, 12, "hello, world");

29_day/!cons_9x.bat

@@ -0,0 +1 @@
+command

29_day/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

29_day/Makefile

@@ -0,0 +1,175 @@
+TOOLPATH = ../z_tools/
+INCPATH  = ../z_tools/haribote/
+
+MAKE     = $(TOOLPATH)make.exe -r
+EDIMG    = $(TOOLPATH)edimg.exe
+IMGTOL   = $(TOOLPATH)imgtol.com
+COPY     = copy
+DEL      = del
+
+#默认动作
+
+default :
+	$(MAKE) haribote.img
+
+#文件生成规则
+
+haribote.img : haribote/ipl20.bin haribote/haribote.sys Makefile \
+		a/a.hrb hello3/hello3.hrb hello4/hello4.hrb hello5/hello5.hrb \
+		winhelo/winhelo.hrb winhelo2/winhelo2.hrb winhelo3/winhelo3.hrb \
+		star1/star1.hrb stars/stars.hrb stars2/stars2.hrb \
+		lines/lines.hrb walk/walk.hrb noodle/noodle.hrb \
+		beepdown/beepdown.hrb color/color.hrb color2/color2.hrb \
+		sosu/sosu.hrb sosu2/sosu2.hrb sosu3/sosu3.hrb \
+		typeipl/typeipl.hrb type/type.hrb iroha/iroha.hrb \
+		chklang/chklang.hrb
+	$(EDIMG)   imgin:../z_tools/fdimg0at.tek \
+		wbinimg src:haribote/ipl20.bin len:512 from:0 to:0 \
+		copy from:haribote/haribote.sys to:@: \
+		copy from:haribote/jp.nas to:@: \
+		copy from:make.bat to:@: \
+		copy from:a/a.hrb to:@: \
+		copy from:hello3/hello3.hrb to:@: \
+		copy from:hello4/hello4.hrb to:@: \
+		copy from:hello5/hello5.hrb to:@: \
+		copy from:winhelo/winhelo.hrb to:@: \
+		copy from:winhelo2/winhelo2.hrb to:@: \
+		copy from:winhelo3/winhelo3.hrb to:@: \
+		copy from:star1/star1.hrb to:@: \
+		copy from:stars/stars.hrb to:@: \
+		copy from:stars2/stars2.hrb to:@: \
+		copy from:lines/lines.hrb to:@: \
+		copy from:walk/walk.hrb to:@: \
+		copy from:noodle/noodle.hrb to:@: \
+		copy from:beepdown/beepdown.hrb to:@: \
+		copy from:color/color.hrb to:@: \
+		copy from:color2/color2.hrb to:@: \
+		copy from:sosu/sosu.hrb to:@: \
+		copy from:sosu2/sosu2.hrb to:@: \
+		copy from:sosu3/sosu3.hrb to:@: \
+		copy from:typeipl/typeipl.hrb to:@: \
+		copy from:type/type.hrb to:@: \
+		copy from:iroha/iroha.hrb to:@: \
+		copy from:chklang/chklang.hrb to:@: \
+		copy from:euc.txt to:@: \
+		copy from:nihongo/nihongo.fnt to:@: \
+		imgout:haribote.img
+
+#命令
+
+run :
+	$(MAKE) haribote.img
+	$(COPY) haribote.img ..\z_tools\qemu\fdimage0.bin
+	$(MAKE) -C ../z_tools/qemu
+
+install :
+	$(MAKE) haribote.img
+	$(IMGTOL) w a: haribote.img
+
+full :
+	$(MAKE) -C haribote
+	$(MAKE) -C apilib
+	$(MAKE) -C a
+	$(MAKE) -C hello3
+	$(MAKE) -C hello4
+	$(MAKE) -C hello5
+	$(MAKE) -C winhelo
+	$(MAKE) -C winhelo2
+	$(MAKE) -C winhelo3
+	$(MAKE) -C star1
+	$(MAKE) -C stars
+	$(MAKE) -C stars2
+	$(MAKE) -C lines
+	$(MAKE) -C walk
+	$(MAKE) -C noodle
+	$(MAKE) -C beepdown
+	$(MAKE) -C color
+	$(MAKE) -C color2
+	$(MAKE) -C sosu
+	$(MAKE) -C sosu2
+	$(MAKE) -C sosu3
+	$(MAKE) -C typeipl
+	$(MAKE) -C type
+	$(MAKE) -C iroha
+	$(MAKE) -C chklang
+	$(MAKE) haribote.img
+
+run_full :
+	$(MAKE) full
+	$(COPY) haribote.img ..\z_tools\qemu\fdimage0.bin
+	$(MAKE) -C ../z_tools/qemu
+
+install_full :
+	$(MAKE) full
+	$(IMGTOL) w a: haribote.img
+
+run_os :
+	$(MAKE) -C haribote
+	$(MAKE) run
+
+clean :
+#不执行任何操作
+
+src_only :
+	$(MAKE) clean
+	-$(DEL) haribote.img
+
+clean_full :
+	$(MAKE) -C haribote		clean
+	$(MAKE) -C apilib			clean
+	$(MAKE) -C a					clean
+	$(MAKE) -C hello3			clean
+	$(MAKE) -C hello4			clean
+	$(MAKE) -C hello5			clean
+	$(MAKE) -C winhelo		clean
+	$(MAKE) -C winhelo2		clean
+	$(MAKE) -C winhelo3		clean
+	$(MAKE) -C star1			clean
+	$(MAKE) -C stars			clean
+	$(MAKE) -C stars2			clean
+	$(MAKE) -C lines			clean
+	$(MAKE) -C walk				clean
+	$(MAKE) -C noodle			clean
+	$(MAKE) -C beepdown		clean
+	$(MAKE) -C color			clean
+	$(MAKE) -C color2			clean
+	$(MAKE) -C sosu				clean
+	$(MAKE) -C sosu2			clean
+	$(MAKE) -C sosu3			clean
+	$(MAKE) -C typeipl		clean
+	$(MAKE) -C type				clean
+	$(MAKE) -C iroha			clean
+	$(MAKE) -C chklang		clean
+
+src_only_full :
+	$(MAKE) -C haribote		src_only
+	$(MAKE) -C apilib			src_only
+	$(MAKE) -C a					src_only
+	$(MAKE) -C hello3			src_only
+	$(MAKE) -C hello4			src_only
+	$(MAKE) -C hello5			src_only
+	$(MAKE) -C winhelo		src_only
+	$(MAKE) -C winhelo2		src_only
+	$(MAKE) -C winhelo3		src_only
+	$(MAKE) -C star1			src_only
+	$(MAKE) -C stars			src_only
+	$(MAKE) -C stars2			src_only
+	$(MAKE) -C lines			src_only
+	$(MAKE) -C walk				src_only
+	$(MAKE) -C noodle			src_only
+	$(MAKE) -C beepdown		src_only
+	$(MAKE) -C color			src_only
+	$(MAKE) -C color2			src_only
+	$(MAKE) -C sosu				src_only
+	$(MAKE) -C sosu2			src_only
+	$(MAKE) -C sosu3			src_only
+	$(MAKE) -C typeipl		src_only
+	$(MAKE) -C type				src_only
+	$(MAKE) -C iroha			src_only
+	$(MAKE) -C chklang		src_only
+	-$(DEL) haribote.img
+
+refresh :
+	$(MAKE) full
+	$(MAKE) clean_full
+	-$(DEL) haribote.img

29_day/a/!cons_9x.bat

@@ -0,0 +1 @@
+command

29_day/a/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

29_day/a/Makefile

@@ -0,0 +1,5 @@
+APP      = a
+STACK    = 1k
+MALLOC   = 0k
+
+include ../app_make.txt

29_day/a/a.c

@@ -0,0 +1,7 @@
+#include "apilib.h"
+
+void HariMain(void)
+{
+	api_putchar('A');
+	api_end();
+}

29_day/a/make.bat

@@ -0,0 +1 @@
+..\..\z_tools\make.exe %1 %2 %3 %4 %5 %6 %7 %8 %9

29_day/apilib.h

@@ -0,0 +1,27 @@
+void api_putchar(int c);
+void api_putstr0(char *s);
+void api_putstr1(char *s, int l);
+void api_end(void);
+int api_openwin(char *buf, int xsiz, int ysiz, int col_inv, char *title);
+void api_putstrwin(int win, int x, int y, int col, int len, char *str);
+void api_boxfilwin(int win, int x0, int y0, int x1, int y1, int col);
+void api_initmalloc(void);
+char *api_malloc(int size);
+void api_free(char *addr, int size);
+void api_point(int win, int x, int y, int col);
+void api_refreshwin(int win, int x0, int y0, int x1, int y1);
+void api_linewin(int win, int x0, int y0, int x1, int y1, int col);
+void api_closewin(int win);
+int api_getkey(int mode);
+int api_alloctimer(void);
+void api_inittimer(int timer, int data);
+void api_settimer(int timer, int time);
+void api_freetimer(int timer);
+void api_beep(int tone);
+int api_fopen(char *fname);
+void api_fclose(int fhandle);
+void api_fseek(int fhandle, int offset, int mode);
+int api_fsize(int fhandle, int mode);
+int api_fread(char *buf, int maxsize, int fhandle);
+int api_cmdline(char *buf, int maxsize);
+int api_getlang(void);

29_day/apilib/!cons_9x.bat

@@ -0,0 +1 @@
+command

29_day/apilib/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

29_day/apilib/Makefile

@@ -0,0 +1,48 @@
+OBJS_API =	api001.obj api002.obj api003.obj api004.obj api005.obj api006.obj \
+			api007.obj api008.obj api009.obj api010.obj api011.obj api012.obj \
+			api013.obj api014.obj api015.obj api016.obj api017.obj api018.obj \
+			api019.obj api020.obj api021.obj api022.obj api023.obj api024.obj \
+			api025.obj api026.obj api027.obj alloca.obj
+
+TOOLPATH = ../../z_tools/
+INCPATH  = ../../z_tools/haribote/
+
+MAKE     = $(TOOLPATH)make.exe -r
+NASK     = $(TOOLPATH)nask.exe
+CC1      = $(TOOLPATH)cc1.exe -I$(INCPATH) -Os -Wall -quiet
+GAS2NASK = $(TOOLPATH)gas2nask.exe -a
+OBJ2BIM  = $(TOOLPATH)obj2bim.exe
+MAKEFONT = $(TOOLPATH)makefont.exe
+BIN2OBJ  = $(TOOLPATH)bin2obj.exe
+BIM2HRB  = $(TOOLPATH)bim2hrb.exe
+RULEFILE = ../haribote.rul
+EDIMG    = $(TOOLPATH)edimg.exe
+IMGTOL   = $(TOOLPATH)imgtol.com
+GOLIB    = $(TOOLPATH)golib00.exe 
+COPY     = copy
+DEL      = del
+
+#默认动作
+
+default :
+	$(MAKE) apilib.lib
+
+#库生成规则
+
+apilib.lib : Makefile $(OBJS_API)
+	$(GOLIB) $(OBJS_API) out:apilib.lib
+
+#文件生成规则
+
+%.obj : %.nas Makefile
+	$(NASK) $*.nas $*.obj $*.lst
+
+#命令
+
+clean :
+	-$(DEL) *.lst
+	-$(DEL) *.obj
+
+src_only :
+	$(MAKE) clean
+	-$(DEL) apilib.lib

29_day/apilib/alloca.nas

@@ -0,0 +1,13 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "alloca.nas"]
+
+		GLOBAL	__alloca
+
+[SECTION .text]
+
+__alloca:
+		ADD		EAX,-4
+		SUB		ESP,EAX
+		JMP		DWORD [ESP+EAX]		; 代替RET

29_day/apilib/api001.nas

@@ -0,0 +1,14 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api001.nas"]
+
+		GLOBAL	_api_putchar
+
+[SECTION .text]
+
+_api_putchar:	; void api_putchar(int c);
+		MOV		EDX,1
+		MOV		AL,[ESP+4]		; c
+		INT		0x40
+		RET

29_day/apilib/api002.nas

@@ -0,0 +1,16 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api002.nas"]
+
+		GLOBAL	_api_putstr0
+
+[SECTION .text]
+
+_api_putstr0:	; void api_putstr0(char *s);
+		PUSH	EBX
+		MOV		EDX,2
+		MOV		EBX,[ESP+8]		; s
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api003.nas

@@ -0,0 +1,17 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api003.nas"]
+
+		GLOBAL	_api_putstr1
+
+[SECTION .text]
+
+_api_putstr1:	; void api_putstr1(char *s, int l);
+		PUSH	EBX
+		MOV		EDX,3
+		MOV		EBX,[ESP+ 8]	; s
+		MOV		ECX,[ESP+12]	; l
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api004.nas

@@ -0,0 +1,12 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api004.nas"]
+
+		GLOBAL	_api_end
+
+[SECTION .text]
+
+_api_end:	; void api_end(void);
+		MOV		EDX,4
+		INT		0x40

29_day/apilib/api005.nas

@@ -0,0 +1,24 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api005.nas"]
+
+		GLOBAL	_api_openwin
+
+[SECTION .text]
+
+_api_openwin:	; int api_openwin(char *buf, int xsiz, int ysiz, int col_inv, char *title);
+		PUSH	EDI
+		PUSH	ESI
+		PUSH	EBX
+		MOV		EDX,5
+		MOV		EBX,[ESP+16]	; buf
+		MOV		ESI,[ESP+20]	; xsiz
+		MOV		EDI,[ESP+24]	; ysiz
+		MOV		EAX,[ESP+28]	; col_inv
+		MOV		ECX,[ESP+32]	; title
+		INT		0x40
+		POP		EBX
+		POP		ESI
+		POP		EDI
+		RET

29_day/apilib/api006.nas

@@ -0,0 +1,27 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api006.nas"]
+
+		GLOBAL	_api_putstrwin
+
+[SECTION .text]
+
+_api_putstrwin:	; void api_putstrwin(int win, int x, int y, int col, int len, char *str);
+		PUSH	EDI
+		PUSH	ESI
+		PUSH	EBP
+		PUSH	EBX
+		MOV		EDX,6
+		MOV		EBX,[ESP+20]	; win
+		MOV		ESI,[ESP+24]	; x
+		MOV		EDI,[ESP+28]	; y
+		MOV		EAX,[ESP+32]	; col
+		MOV		ECX,[ESP+36]	; len
+		MOV		EBP,[ESP+40]	; str
+		INT		0x40
+		POP		EBX
+		POP		EBP
+		POP		ESI
+		POP		EDI
+		RET

29_day/apilib/api007.nas

@@ -0,0 +1,27 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api007.nas"]
+
+		GLOBAL	_api_boxfilwin
+
+[SECTION .text]
+
+_api_boxfilwin:	; void api_boxfilwin(int win, int x0, int y0, int x1, int y1, int col);
+		PUSH	EDI
+		PUSH	ESI
+		PUSH	EBP
+		PUSH	EBX
+		MOV		EDX,7
+		MOV		EBX,[ESP+20]	; win
+		MOV		EAX,[ESP+24]	; x0
+		MOV		ECX,[ESP+28]	; y0
+		MOV		ESI,[ESP+32]	; x1
+		MOV		EDI,[ESP+36]	; y1
+		MOV		EBP,[ESP+40]	; col
+		INT		0x40
+		POP		EBX
+		POP		EBP
+		POP		ESI
+		POP		EDI
+		RET

29_day/apilib/api008.nas

@@ -0,0 +1,20 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api008.nas"]
+
+		GLOBAL	_api_initmalloc
+
+[SECTION .text]
+
+_api_initmalloc:	; void api_initmalloc(void);
+		PUSH	EBX
+		MOV		EDX,8
+		MOV		EBX,[CS:0x0020]		; malloc内存空间的地址
+		MOV		EAX,EBX
+		ADD		EAX,32*1024				; 加上32KB
+		MOV		ECX,[CS:0x0000]		; 数据段的大小
+		SUB		ECX,EAX
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api009.nas

@@ -0,0 +1,17 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api009.nas"]
+
+		GLOBAL	_api_malloc
+
+[SECTION .text]
+
+_api_malloc:		; char *api_malloc(int size);
+		PUSH	EBX
+		MOV		EDX,9
+		MOV		EBX,[CS:0x0020]
+		MOV		ECX,[ESP+8]			; size
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api010.nas

@@ -0,0 +1,18 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api010.nas"]
+
+		GLOBAL	_api_free
+
+[SECTION .text]
+
+_api_free:			; void api_free(char *addr, int size);
+		PUSH	EBX
+		MOV		EDX,10
+		MOV		EBX,[CS:0x0020]
+		MOV		EAX,[ESP+ 8]		; addr
+		MOV		ECX,[ESP+12]		; size
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api011.nas

@@ -0,0 +1,23 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api011.nas"]
+
+		GLOBAL	_api_point
+
+[SECTION .text]
+
+_api_point:		; void api_point(int win, int x, int y, int col);
+		PUSH	EDI
+		PUSH	ESI
+		PUSH	EBX
+		MOV		EDX,11
+		MOV		EBX,[ESP+16]	; win
+		MOV		ESI,[ESP+20]	; x
+		MOV		EDI,[ESP+24]	; y
+		MOV		EAX,[ESP+28]	; col
+		INT		0x40
+		POP		EBX
+		POP		ESI
+		POP		EDI
+		RET

29_day/apilib/api012.nas

@@ -0,0 +1,24 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api012.nas"]
+
+		GLOBAL	_api_refreshwin
+
+[SECTION .text]
+
+_api_refreshwin:	; void api_refreshwin(int win, int x0, int y0, int x1, int y1);
+		PUSH	EDI
+		PUSH	ESI
+		PUSH	EBX
+		MOV		EDX,12
+		MOV		EBX,[ESP+16]	; win
+		MOV		EAX,[ESP+20]	; x0
+		MOV		ECX,[ESP+24]	; y0
+		MOV		ESI,[ESP+28]	; x1
+		MOV		EDI,[ESP+32]	; y1
+		INT		0x40
+		POP		EBX
+		POP		ESI
+		POP		EDI
+		RET

29_day/apilib/api013.nas

@@ -0,0 +1,27 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api013.nas"]
+
+		GLOBAL	_api_linewin
+
+[SECTION .text]
+
+_api_linewin:		; void api_linewin(int win, int x0, int y0, int x1, int y1, int col);
+		PUSH	EDI
+		PUSH	ESI
+		PUSH	EBP
+		PUSH	EBX
+		MOV		EDX,13
+		MOV		EBX,[ESP+20]	; win
+		MOV		EAX,[ESP+24]	; x0
+		MOV		ECX,[ESP+28]	; y0
+		MOV		ESI,[ESP+32]	; x1
+		MOV		EDI,[ESP+36]	; y1
+		MOV		EBP,[ESP+40]	; col
+		INT		0x40
+		POP		EBX
+		POP		EBP
+		POP		ESI
+		POP		EDI
+		RET

29_day/apilib/api014.nas

@@ -0,0 +1,16 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api014.nas"]
+
+		GLOBAL	_api_closewin
+
+[SECTION .text]
+
+_api_closewin:		; void api_closewin(int win);
+		PUSH	EBX
+		MOV		EDX,14
+		MOV		EBX,[ESP+8]	; win
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api015.nas

@@ -0,0 +1,14 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api015.nas"]
+
+		GLOBAL	_api_getkey
+
+[SECTION .text]
+
+_api_getkey:		; int api_getkey(int mode);
+		MOV		EDX,15
+		MOV		EAX,[ESP+4]	; mode
+		INT		0x40
+		RET

29_day/apilib/api016.nas

@@ -0,0 +1,13 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api016.nas"]
+
+		GLOBAL	_api_alloctimer
+
+[SECTION .text]
+
+_api_alloctimer:	; int api_alloctimer(void);
+		MOV		EDX,16
+		INT		0x40
+		RET

29_day/apilib/api017.nas

@@ -0,0 +1,17 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api017.nas"]
+
+		GLOBAL	_api_inittimer
+
+[SECTION .text]
+
+_api_inittimer:		; void api_inittimer(int timer, int data);
+		PUSH	EBX
+		MOV		EDX,17
+		MOV		EBX,[ESP+ 8]		; timer
+		MOV		EAX,[ESP+12]		; data
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api018.nas

@@ -0,0 +1,17 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api018.nas"]
+
+		GLOBAL	_api_settimer
+
+[SECTION .text]
+
+_api_settimer:		; void api_settimer(int timer, int time);
+		PUSH	EBX
+		MOV		EDX,18
+		MOV		EBX,[ESP+ 8]		; timer
+		MOV		EAX,[ESP+12]		; time
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api019.nas

@@ -0,0 +1,16 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api019.nas"]
+
+		GLOBAL	_api_freetimer
+
+[SECTION .text]
+
+_api_freetimer:		; void api_freetimer(int timer);
+		PUSH	EBX
+		MOV		EDX,19
+		MOV		EBX,[ESP+ 8]		; timer
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api020.nas

@@ -0,0 +1,14 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api020.nas"]
+
+		GLOBAL	_api_beep
+
+[SECTION .text]
+
+_api_beep:			; void api_beep(int tone);
+		MOV		EDX,20
+		MOV		EAX,[ESP+4]			; tone
+		INT		0x40
+		RET

29_day/apilib/api021.nas

@@ -0,0 +1,16 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api021.nas"]
+
+		GLOBAL	_api_fopen
+
+[SECTION .text]
+
+_api_fopen:			; int api_fopen(char *fname);
+		PUSH	EBX
+		MOV		EDX,21
+		MOV		EBX,[ESP+8]			; fname
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api022.nas

@@ -0,0 +1,14 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api022.nas"]
+
+		GLOBAL	_api_fclose
+
+[SECTION .text]
+
+_api_fclose:		; void api_fclose(int fhandle);
+		MOV		EDX,22
+		MOV		EAX,[ESP+4]			; fhandle
+		INT		0x40
+		RET

29_day/apilib/api023.nas

@@ -0,0 +1,18 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api023.nas"]
+
+		GLOBAL	_api_fseek
+
+[SECTION .text]
+
+_api_fseek:			; void api_fseek(int fhandle, int offset, int mode);
+		PUSH	EBX
+		MOV		EDX,23
+		MOV		EAX,[ESP+8]			; fhandle
+		MOV		ECX,[ESP+16]		; mode
+		MOV		EBX,[ESP+12]		; offset
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api024.nas

@@ -0,0 +1,15 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api024.nas"]
+
+		GLOBAL	_api_fsize
+
+[SECTION .text]
+
+_api_fsize:			; int api_fsize(int fhandle, int mode);
+		MOV		EDX,24
+		MOV		EAX,[ESP+4]			; fhandle
+		MOV		ECX,[ESP+8]			; mode
+		INT		0x40
+		RET

29_day/apilib/api025.nas

@@ -0,0 +1,18 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api025.nas"]
+
+		GLOBAL	_api_fread
+
+[SECTION .text]
+
+_api_fread:			; int api_fread(char *buf, int maxsize, int fhandle);
+		PUSH	EBX
+		MOV		EDX,25
+		MOV		EAX,[ESP+16]		; fhandle
+		MOV		ECX,[ESP+12]		; maxsize
+		MOV		EBX,[ESP+8]			; buf
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api026.nas

@@ -0,0 +1,17 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api026.nas"]
+
+		GLOBAL	_api_cmdline
+
+[SECTION .text]
+
+_api_cmdline:		; int api_cmdline(char *buf, int maxsize);
+		PUSH	EBX
+		MOV		EDX,26
+		MOV		ECX,[ESP+12]		; maxsize
+		MOV		EBX,[ESP+8]			; buf
+		INT		0x40
+		POP		EBX
+		RET

29_day/apilib/api027.nas

@@ -0,0 +1,13 @@
+[FORMAT "WCOFF"]
+[INSTRSET "i486p"]
+[BITS 32]
+[FILE "api027.nas"]
+
+		GLOBAL	_api_getlang
+
+[SECTION .text]
+
+_api_getlang:		; int api_getlang(void);
+		MOV		EDX,27
+		INT		0x40
+		RET

29_day/apilib/make.bat

@@ -0,0 +1 @@
+..\..\z_tools\make.exe %1 %2 %3 %4 %5 %6 %7 %8 %9

29_day/app_make.txt

@@ -0,0 +1,85 @@
+TOOLPATH = ../../z_tools/
+INCPATH  = ../../z_tools/haribote/
+APILIBPATH   = ../apilib/
+HARIBOTEPATH = ../haribote/
+
+MAKE     = $(TOOLPATH)make.exe -r
+NASK     = $(TOOLPATH)nask.exe
+CC1      = $(TOOLPATH)cc1.exe -I$(INCPATH) -I../ -Os -Wall -quiet
+GAS2NASK = $(TOOLPATH)gas2nask.exe -a
+OBJ2BIM  = $(TOOLPATH)obj2bim.exe
+MAKEFONT = $(TOOLPATH)makefont.exe
+BIN2OBJ  = $(TOOLPATH)bin2obj.exe
+BIM2HRB  = $(TOOLPATH)bim2hrb.exe
+BIM2BIN  = $(TOOLPATH)bim2bin.exe
+RULEFILE = ../haribote.rul
+EDIMG    = $(TOOLPATH)edimg.exe
+IMGTOL   = $(TOOLPATH)imgtol.com
+GOLIB    = $(TOOLPATH)golib00.exe 
+COPY     = copy
+DEL      = del
+
+#默认动作
+
+default :
+	$(MAKE) $(APP).hrb
+
+#文件生成规则
+
+$(APP).bim : $(APP).obj $(APILIBPATH)apilib.lib Makefile ../app_make.txt
+	$(OBJ2BIM) @$(RULEFILE) out:$(APP).bim map:$(APP).map stack:$(STACK) \
+		$(APP).obj $(APILIBPATH)apilib.lib
+
+haribote.img : ../haribote/ipl20.bin ../haribote/haribote.sys $(APP).hrb \
+		Makefile ../app_make.txt
+	$(EDIMG)   imgin:../../z_tools/fdimg0at.tek \
+		wbinimg src:../haribote/ipl20.bin len:512 from:0 to:0 \
+		copy from:../haribote/haribote.sys to:@: \
+		copy from:$(APP).hrb to:@: \
+		copy from:../nihongo/nihongo.fnt to:@: \
+		imgout:haribote.img
+
+#一般规则
+
+%.gas : %.c ../apilib.h Makefile ../app_make.txt
+	$(CC1) -o $*.gas $*.c
+
+%.nas : %.gas Makefile ../app_make.txt
+	$(GAS2NASK) $*.gas $*.nas
+
+%.obj : %.nas Makefile ../app_make.txt
+	$(NASK) $*.nas $*.obj $*.lst
+
+%.org : %.bim Makefile ../app_make.txt
+	$(BIM2HRB) $*.bim $*.org $(MALLOC)
+
+%.hrb : %.org Makefile ../app_make.txt
+	$(BIM2BIN) -osacmp in:$*.org out:$*.hrb
+
+#命令
+
+run :
+	$(MAKE) haribote.img
+	$(COPY) haribote.img ..\..\z_tools\qemu\fdimage0.bin
+	$(MAKE) -C ../../z_tools/qemu
+
+full :
+	$(MAKE) -C $(APILIBPATH)
+	$(MAKE) $(APP).hrb
+
+run_full :
+	$(MAKE) -C $(APILIBPATH)
+	$(MAKE) -C ../haribote
+	$(MAKE) run
+
+clean :
+	-$(DEL) *.lst
+	-$(DEL) *.obj
+	-$(DEL) *.map
+	-$(DEL) *.bim
+	-$(DEL) *.org
+	-$(DEL) haribote.img
+
+src_only :
+	$(MAKE) clean
+	-$(DEL) $(APP).hrb

29_day/beepdown/!cons_9x.bat

@@ -0,0 +1 @@
+command

29_day/beepdown/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

29_day/beepdown/Makefile

@@ -0,0 +1,5 @@
+APP      = beepdown
+STACK    = 1k
+MALLOC   = 40k
+
+include ../app_make.txt

29_day/beepdown/beepdown.c

@@ -0,0 +1,19 @@
+#include "apilib.h"
+
+void HariMain(void)
+{
+	int i, timer;
+	timer = api_alloctimer();
+	api_inittimer(timer, 128);
+	for (i = 20000000; i >= 20000; i -= i / 100) {
+		/* 20KHz～20Hz，即人类可以听到的声音范围*/
+		/* i以1%的速度递减*/
+		api_beep(i);
+		api_settimer(timer, 1); /* 0.01秒*/
+		if (api_getkey(1) != 128) {
+			break;
+		}
+	}
+	api_beep(0);
+	api_end();
+}

29_day/beepdown/make.bat

@@ -0,0 +1 @@
+..\..\z_tools\make.exe %1 %2 %3 %4 %5 %6 %7 %8 %9

29_day/chklang/!cons_9x.bat

@@ -0,0 +1 @@
+command

29_day/chklang/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

29_day/chklang/Makefile

@@ -0,0 +1,5 @@
+APP      = chklang
+STACK    = 1k
+MALLOC   = 0k
+
+include ../app_make.txt