bball

29_day/Makefile

@@ -21,8 +21,8 @@ haribote.img : haribote/ipl20.bin haribote/haribote.sys Makefile \
 		lines/lines.hrb walk/walk.hrb noodle/noodle.hrb \
 		beepdown/beepdown.hrb color/color.hrb color2/color2.hrb \
 		sosu/sosu.hrb sosu2/sosu2.hrb sosu3/sosu3.hrb \
-		typeipl/typeipl.hrb type/type.hrb iroha/iroha.hrb \
-		chklang/chklang.hrb
+		type/type.hrb iroha/iroha.hrb chklang/chklang.hrb \
+		notrec/notrec.hrb bball/bball.hrb
 	$(EDIMG)   imgin:../z_tools/fdimg0at.tek \
 		wbinimg src:haribote/ipl20.bin len:512 from:0 to:0 \
 		copy from:haribote/haribote.sys to:@: \
@@ -47,11 +47,12 @@ haribote.img : haribote/ipl20.bin haribote/haribote.sys Makefile \
 		copy from:sosu/sosu.hrb to:@: \
 		copy from:sosu2/sosu2.hrb to:@: \
 		copy from:sosu3/sosu3.hrb to:@: \
-		copy from:typeipl/typeipl.hrb to:@: \
 		copy from:type/type.hrb to:@: \
 		copy from:iroha/iroha.hrb to:@: \
 		copy from:chklang/chklang.hrb to:@: \
 		copy from:euc.txt to:@: \
+		copy from:notrec/notrec.hrb to:@: \
+		copy from:bball/bball.hrb to:@: \
 		copy from:nihongo/nihongo.fnt to:@: \
 		imgout:haribote.img
 
@@ -88,10 +89,11 @@ full :
 	$(MAKE) -C sosu
 	$(MAKE) -C sosu2
 	$(MAKE) -C sosu3
-	$(MAKE) -C typeipl
 	$(MAKE) -C type
 	$(MAKE) -C iroha
 	$(MAKE) -C chklang
+	$(MAKE) -C notrec
+	$(MAKE) -C bball
 	$(MAKE) haribote.img
 
 run_full :
@@ -116,57 +118,59 @@ src_only :
 
 clean_full :
 	$(MAKE) -C haribote		clean
-	$(MAKE) -C apilib			clean
-	$(MAKE) -C a					clean
-	$(MAKE) -C hello3			clean
-	$(MAKE) -C hello4			clean
-	$(MAKE) -C hello5			clean
+	$(MAKE) -C apilib		clean
+	$(MAKE) -C a			clean
+	$(MAKE) -C hello3		clean
+	$(MAKE) -C hello4		clean
+	$(MAKE) -C hello5		clean
 	$(MAKE) -C winhelo		clean
 	$(MAKE) -C winhelo2		clean
 	$(MAKE) -C winhelo3		clean
-	$(MAKE) -C star1			clean
-	$(MAKE) -C stars			clean
-	$(MAKE) -C stars2			clean
-	$(MAKE) -C lines			clean
-	$(MAKE) -C walk				clean
-	$(MAKE) -C noodle			clean
+	$(MAKE) -C star1		clean
+	$(MAKE) -C stars		clean
+	$(MAKE) -C stars2		clean
+	$(MAKE) -C lines		clean
+	$(MAKE) -C walk			clean
+	$(MAKE) -C noodle		clean
 	$(MAKE) -C beepdown		clean
-	$(MAKE) -C color			clean
-	$(MAKE) -C color2			clean
-	$(MAKE) -C sosu				clean
-	$(MAKE) -C sosu2			clean
-	$(MAKE) -C sosu3			clean
-	$(MAKE) -C typeipl		clean
-	$(MAKE) -C type				clean
-	$(MAKE) -C iroha			clean
+	$(MAKE) -C color		clean
+	$(MAKE) -C color2		clean
+	$(MAKE) -C sosu			clean
+	$(MAKE) -C sosu2		clean
+	$(MAKE) -C sosu3		clean
+	$(MAKE) -C type			clean
+	$(MAKE) -C iroha		clean
 	$(MAKE) -C chklang		clean
+	$(MAKE) -C notrec		clean
+	$(MAKE) -C bball		clean
 
 src_only_full :
 	$(MAKE) -C haribote		src_only
-	$(MAKE) -C apilib			src_only
-	$(MAKE) -C a					src_only
-	$(MAKE) -C hello3			src_only
-	$(MAKE) -C hello4			src_only
-	$(MAKE) -C hello5			src_only
+	$(MAKE) -C apilib		src_only
+	$(MAKE) -C a			src_only
+	$(MAKE) -C hello3		src_only
+	$(MAKE) -C hello4		src_only
+	$(MAKE) -C hello5		src_only
 	$(MAKE) -C winhelo		src_only
 	$(MAKE) -C winhelo2		src_only
 	$(MAKE) -C winhelo3		src_only
-	$(MAKE) -C star1			src_only
-	$(MAKE) -C stars			src_only
-	$(MAKE) -C stars2			src_only
-	$(MAKE) -C lines			src_only
-	$(MAKE) -C walk				src_only
-	$(MAKE) -C noodle			src_only
+	$(MAKE) -C star1		src_only
+	$(MAKE) -C stars		src_only
+	$(MAKE) -C stars2		src_only
+	$(MAKE) -C lines		src_only
+	$(MAKE) -C walk			src_only
+	$(MAKE) -C noodle		src_only
 	$(MAKE) -C beepdown		src_only
-	$(MAKE) -C color			src_only
-	$(MAKE) -C color2			src_only
-	$(MAKE) -C sosu				src_only
-	$(MAKE) -C sosu2			src_only
-	$(MAKE) -C sosu3			src_only
-	$(MAKE) -C typeipl		src_only
-	$(MAKE) -C type				src_only
-	$(MAKE) -C iroha			src_only
+	$(MAKE) -C color		src_only
+	$(MAKE) -C color2		src_only
+	$(MAKE) -C sosu			src_only
+	$(MAKE) -C sosu2		src_only
+	$(MAKE) -C sosu3		src_only
+	$(MAKE) -C type			src_only
+	$(MAKE) -C iroha		src_only
 	$(MAKE) -C chklang		src_only
+	$(MAKE) -C notrec		src_only
+	$(MAKE) -C bball		src_only
 	-$(DEL) haribote.img
 
 refresh :

29_day/app_make.txt

@@ -1,6 +1,7 @@
 TOOLPATH = ../../z_tools/
 INCPATH  = ../../z_tools/haribote/
 APILIBPATH   = ../apilib/
+STDLIBPATH   = ../stdlib/
 HARIBOTEPATH = ../haribote/
 
 MAKE     = $(TOOLPATH)make.exe -r
@@ -26,9 +27,13 @@ default :
 
 #文件生成规则
 
-$(APP).bim : $(APP).obj $(APILIBPATH)apilib.lib Makefile ../app_make.txt
+$(APP).bim : $(APP).obj $(APILIBPATH)apilib.lib $(STDLIBPATH)stdlib.lib Makefile ../app_make.txt
 	$(OBJ2BIM) @$(RULEFILE) out:$(APP).bim map:$(APP).map stack:$(STACK) \
-		$(APP).obj $(APILIBPATH)apilib.lib
+		$(APP).obj $(APILIBPATH)apilib.lib $(STDLIBPATH)stdlib.lib
+
+$(STDAPP).bim : $(APP).obj $(STDLIBPATH)stdlib.lib Makefile ../app_make.txt
+	$(OBJ2BIM) @$(RULEFILE) out:$(APP).bim map:$(APP).map stack:$(STACK) \
+		$(APP).obj $(STDLIBPATH)stdlib.lib
 
 haribote.img : ../haribote/ipl20.bin ../haribote/haribote.sys $(APP).hrb \
 		Makefile ../app_make.txt
@@ -41,7 +46,7 @@ haribote.img : ../haribote/ipl20.bin ../haribote/haribote.sys $(APP).hrb \
 
 #一般规则
 
-%.gas : %.c ../apilib.h Makefile ../app_make.txt
+%.gas : %.c ../apilib.h  ../stdlib.h Makefile ../app_make.txt
 	$(CC1) -o $*.gas $*.c
 
 %.nas : %.gas Makefile ../app_make.txt
@@ -65,10 +70,12 @@ run :
 
 full :
 	$(MAKE) -C $(APILIBPATH)
+	$(MAKE) -C $(STDLIBPATH)
 	$(MAKE) $(APP).hrb
 
 run_full :
 	$(MAKE) -C $(APILIBPATH)
+	$(MAKE) -C $(STDLIBPATH)
 	$(MAKE) -C ../haribote
 	$(MAKE) run
 

29_day/bball/Makefile

@@ -1,5 +1,5 @@
-APP      = typeipl
-STACK    = 1k
+APP      = bball
+STACK    = 52k
 MALLOC   = 0k
 
 include ../app_make.txt

29_day/bball/bball.c

@@ -0,0 +1,37 @@
+#include "apilib.h"
+
+void HariMain(void)
+{
+	int win, i, j, dis;
+	char buf[216 * 237];
+	struct POINT {
+		int x, y;
+	};
+	static struct POINT table[16] = {
+		{ 204, 129 }, { 195,  90 }, { 172,  58 }, { 137,  38 }, {  98,  34 },
+		{  61,  46 }, {  31,  73 }, {  15, 110 }, {  15, 148 }, {  31, 185 },
+		{  61, 212 }, {  98, 224 }, { 137, 220 }, { 172, 200 }, { 195, 168 },
+		{ 204, 129 }
+	};
+
+	win = api_openwin(buf, 216, 237, -1, "bball");
+	api_boxfilwin(win, 8, 29, 207, 228, 0);
+	for (i = 0; i <= 14; i++) {
+		for (j = i + 1; j <= 15; j++) {
+			dis = j - i; /*两点间的距离*/
+			if (dis >= 8) {
+				dis = 15 - dis; /*逆向计数*/
+			}
+			if (dis != 0) {
+				api_linewin(win, table[i].x, table[i].y, table[j].x, table[j].y, 8 - dis);
+			}
+		}
+	}
+
+	for (;;) {
+		if (api_getkey(1) == 0x0a) {
+			break; /*按下回车键则break; */
+		}
+	}
+	api_end();
+}

29_day/haribote/Makefile

@@ -28,9 +28,6 @@ default :
 
 # 镜像文件生成
 
-ipl10.bin : ipl10.nas Makefile
-	$(NASK) ipl10.nas ipl10.bin ipl10.lst
-
 ipl20.bin : ipl20.nas Makefile
 	$(NASK) ipl20.nas ipl20.bin ipl20.lst
 
@@ -78,6 +75,5 @@ clean :
 
 src_only :
 	$(MAKE) clean
-	-$(DEL) ipl10.bin
 	-$(DEL) ipl20.bin
 	-$(DEL) haribote.sys

29_day/haribote/console.c

@@ -489,6 +489,16 @@ int *hrb_api(int edi, int esi, int ebp, int esp, int ebx, int edx, int ecx, int
 		sht = (struct SHEET *) (ebx & 0xfffffffe);
 		hrb_api_linewin(sht, eax, ecx, esi, edi, ebp);
 		if ((ebx & 1) == 0) {
+			if (eax > esi) {
+				i = eax;
+				eax = esi;
+				esi = i;
+			}
+			if (ecx > edi) {
+				i = ecx;
+				ecx = edi;
+				edi = i;
+			}
 			sheet_refresh(sht, eax, ecx, esi + 1, edi + 1);
 		}
 	} else if (edx == 14) {

29_day/haribote/ipl10.nas

@@ -1,109 +0,0 @@
-; haribote-ipl
-; TAB=4
-
-CYLS	EQU		10				; 声明CYLS=10
-
-		ORG		0x7c00			; 指明程序装载地址
-
-; 标准FAT12格式软盘专用的代码 Stand FAT12 format floppy code
-
-		JMP		entry
-		DB		0x90
-		DB		"HARIBOTE"		; 启动扇区名称（8字节）
-		DW		512				; 每个扇区（sector）大小（必须512字节）
-		DB		1				; 簇（cluster）大小（必须为1个扇区）
-		DW		1				; FAT起始位置（一般为第一个扇区）
-		DB		2				; FAT个数（必须为2）
-		DW		224				; 根目录大小（一般为224项）
-		DW		2880			; 该磁盘大小（必须为2880扇区1440*1024/512）
-		DB		0xf0			; 磁盘类型（必须为0xf0）
-		DW		9				; FAT的长度（必??9扇区）
-		DW		18				; 一个磁道（track）有几个扇区（必须为18）
-		DW		2				; 磁头数（必??2）
-		DD		0				; 不使用分区，必须是0
-		DD		2880			; 重写一次磁盘大小
-		DB		0,0,0x29		; 意义不明（固定）
-		DD		0xffffffff		; （可能是）卷标号码
-		DB		"HARIBOTEOS "	; 磁盘的名称（必须为11字?，不足填空格）
-		DB		"FAT12   "		; 磁盘格式名称（必??8字?，不足填空格）
-		RESB	18				; 先空出18字节
-
-; 程序主体
-
-entry:
-		MOV		AX,0			; 初始化寄存器
-		MOV		SS,AX
-		MOV		SP,0x7c00
-		MOV		DS,AX
-
-; 读取磁盘
-
-		MOV		AX,0x0820
-		MOV		ES,AX
-		MOV		CH,0			; 柱面0
-		MOV		DH,0			; 磁头0
-		MOV		CL,2			; 扇区2
-
-readloop:
-		MOV		SI,0			; 记录失败次数寄存器
-
-retry:
-		MOV		AH,0x02			; AH=0x02 : 读入磁盘
-		MOV		AL,1			; 1个扇区
-		MOV		BX,0
-		MOV		DL,0x00			; A驱动器
-		INT		0x13			; 调用磁盘BIOS
-		JNC		next			; 没出错则跳转到fin
-		ADD		SI,1			; 往SI加1
-		CMP		SI,5			; 比较SI与5
-		JAE		error			; SI >= 5 跳转到error
-		MOV		AH,0x00
-		MOV		DL,0x00			; A驱动器
-		INT		0x13			; 重置驱动器
-		JMP		retry
-next:
-		MOV		AX,ES			; 把内存地址后移0x200（512/16十六进制转换）
-		ADD		AX,0x0020
-		MOV		ES,AX			; ADD ES,0x020因为没有ADD ES，只能通过AX进行
-		ADD		CL,1			; 往CL里面加1
-		CMP		CL,18			; 比较CL与18
-		JBE		readloop		; CL <= 18 跳转到readloop
-		MOV		CL,1
-		ADD		DH,1
-		CMP		DH,2
-		JB		readloop		; DH < 2 跳转到readloop
-		MOV		DH,0
-		ADD		CH,1
-		CMP		CH,CYLS
-		JB		readloop		; CH < CYLS 跳转到readloop
-
-; 读取完毕，跳转到haribote.sys执行！
-		MOV		[0x0ff0],CH		; IPLがどこまで読んだのかをメモ
-		JMP		0xc200
-
-error:
-		MOV		SI,msg
-
-putloop:
-		MOV		AL,[SI]
-		ADD		SI,1			; 给SI加1
-		CMP		AL,0
-		JE		fin
-		MOV		AH,0x0e			; 显示一个文字
-		MOV		BX,15			; 指定字符颜色
-		INT		0x10			; 调用显卡BIOS
-		JMP		putloop
-
-fin:
-		HLT						; 让CPU停止，等待指令
-		JMP		fin				; 无限循环
-
-msg:
-		DB		0x0a, 0x0a		; 换行两次
-		DB		"load error"
-		DB		0x0a			; 换行
-		DB		0
-
-		RESB	0x7dfe-$		; 填写0x00直到0x001fe
-
-		DB		0x55, 0xaa

29_day/haribote/jp.nas

@@ -1,7 +1,7 @@
 ; haribote-ipl
 ; TAB=4
 
-CYLS	EQU		10				; どこまで読み込むか
+CYLS	EQU		20				; どこまで読み込むか
 
 		ORG		0x7c00			; このプログラムがどこに読み込まれるのか
 

29_day/hello4/Makefile

@@ -4,5 +4,5 @@ MALLOC   = 0k
 
 include ../app_make.txt
 
-$(APP).hrb : $(APP).org Makefile
+$(STDAPP).hrb : $(APP).org Makefile
 	$(COPY) $(APP).org $(APP).hrb

29_day/hello4/hello4.c

@@ -1,7 +1,7 @@
-#include "apilib.h"
+#include "stdlib.h"
 
 void HariMain(void)
 {
-	api_putstr0("hello, world\n");
-	api_end();
+	printf("hello, world : %s %d\n", "aaa", 10);
+	exit(0);
 }

29_day/notrec/!cons_9x.bat

@@ -0,0 +1 @@
+command

29_day/notrec/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

29_day/notrec/Makefile

@@ -0,0 +1,5 @@
+APP      = notrec
+STACK    = 11k
+MALLOC   = 0k
+
+include ../app_make.txt

29_day/notrec/make.bat

@@ -0,0 +1 @@
+..\..\z_tools\make.exe %1 %2 %3 %4 %5 %6 %7 %8 %9

29_day/notrec/notrec.c

@@ -0,0 +1,17 @@
+#include "apilib.h"
+
+void HariMain(void)
+{
+	int win;
+	char buf[150 * 70];
+	win = api_openwin(buf, 150, 70, 255, "notrec");
+	api_boxfilwin(win,   0, 50,  34, 69, 255);
+	api_boxfilwin(win, 115, 50, 149, 69, 255);
+	api_boxfilwin(win,  50, 30,  99, 49, 255);
+	for (;;) {
+		if (api_getkey(1) == 0x0a) {
+			break; /*按下回车键则break; */
+		}
+	}
+	api_end();
+}

29_day/stdlib.h

@@ -0,0 +1,4 @@
+int putchar(int c);
+void exit(int status);
+int printf(char *format, ...);
+void *malloc(int size);

29_day/stdlib/!cons_9x.bat

@@ -0,0 +1 @@
+command

29_day/stdlib/!cons_nt.bat

@@ -0,0 +1 @@
+cmd.exe

29_day/stdlib/Makefile

@@ -0,0 +1,50 @@
+OBJS_API =	stdlib.obj
+
+TOOLPATH = ../../z_tools/
+INCPATH  = ../../z_tools/haribote/
+
+MAKE     = $(TOOLPATH)make.exe -r
+NASK     = $(TOOLPATH)nask.exe
+CC1      = $(TOOLPATH)cc1.exe -I$(INCPATH) -Os -Wall -quiet
+GAS2NASK = $(TOOLPATH)gas2nask.exe -a
+OBJ2BIM  = $(TOOLPATH)obj2bim.exe
+MAKEFONT = $(TOOLPATH)makefont.exe
+BIN2OBJ  = $(TOOLPATH)bin2obj.exe
+BIM2HRB  = $(TOOLPATH)bim2hrb.exe
+RULEFILE = ../haribote.rul
+EDIMG    = $(TOOLPATH)edimg.exe
+IMGTOL   = $(TOOLPATH)imgtol.com
+GOLIB    = $(TOOLPATH)golib00.exe 
+COPY     = copy
+DEL      = del
+
+#默认动作
+
+default :
+	$(MAKE) stdlib.lib
+
+#库生成规则
+
+stdlib.lib : Makefile $(OBJS_API)
+	$(GOLIB) $(OBJS_API) out:stdlib.lib
+
+#文件生成规则
+
+%.gas : %.c ../stdlib.h Makefile
+	$(CC1) -o $*.gas $*.c
+
+%.nas : %.gas Makefile
+	$(GAS2NASK) $*.gas $*.nas
+
+%.obj : %.nas Makefile
+	$(NASK) $*.nas $*.obj $*.lst
+
+#命令
+
+clean :
+	-$(DEL) *.lst
+	-$(DEL) *.obj
+
+src_only :
+	$(MAKE) clean
+	-$(DEL) stdlib.lib

29_day/stdlib/make.bat

@@ -0,0 +1 @@
+..\..\z_tools\make.exe %1 %2 %3 %4 %5 %6 %7 %8 %9

29_day/stdlib/stdlib.c

@@ -0,0 +1,51 @@
+#include "../apilib.h"
+#include "../stdlib.h"
+
+#include <stdio.h>
+#include <stdarg.h>
+
+int putchar(int c)
+{
+	api_putchar(c);
+	return c;
+}
+
+void exit(int status)
+{
+	api_end();
+}
+
+int printf(char *format, ...)
+{
+	va_list ap;
+	char s[1000];
+	int i;
+
+	va_start(ap, format);
+	i = vsprintf(s, format, ap);
+	api_putstr0(s);
+	va_end(ap);
+	return i;
+}
+
+void *malloc(int size)
+{
+	char *p = api_malloc(size + 16);
+	if (p != 0) {
+		*((int *) p) = size;
+		p += 16;
+	}
+	return p;
+}
+
+void free(void *p)
+{
+	char *q = p;
+	int size;
+	if (q != 0) {
+		q -= 16;
+		size = *((int *) q);
+		api_free(q, size + 16);
+	}
+	return;
+}

29_day/typeipl/typeipl.c

@@ -1,17 +0,0 @@
-#include "apilib.h"
-
-void HariMain(void)
-{
-	int fh;
-	char c;
-	fh = api_fopen("ipl10.nas");
-	if (fh != 0) {
-		for (;;) {
-			if (api_fread(&c, 1, fh) == 0) {
-				break;
-			}
-			api_putchar(c);
-		}
-	}
-	api_end();
-}