add README.md for x86-interrupt-list

.gitignore

@@ -0,0 +1 @@
+.idea/

一些非必要的资料/x86-interrupt-list/README.md

@@ -0,0 +1,83 @@
+x86 中断函数列表
+
+一开始从 stackoverflow 上找到这个网站：
+[http://www.ctyme.com/intr/int.htm](http://www.ctyme.com/intr/int.htm)
+
+但是没找到下载地址，所以又搜了下找到了这个网站[Public Files on FTP.CS.CMU.EDU](https://www.cs.cmu.edu/~ralf/files.html)
+
+目录和文件（可按文本格式打开）按照字母序，比如 `inter61a/INTERRUP.A` 包含了 `INT 00` 到 `INT 10`
+
+文中会对指令作出较为详细的描述，以 最近一篇文章中的中
+[INT 13](https://github.com/sunym1993/flash-linux0.11-talk/blob/547ef4b440ff2ed1be2204e459316a39e9a734fc/%E4%B8%80%E4%BA%9B%E9%9D%9E%E5%BF%85%E8%A6%81%E7%9A%84%E8%B5%84%E6%96%99/linux-0.11/boot/bootsect.s#L71) 
+为例, 可以看到给 `AX` 赋值了 `#0x0200+SETUPLEN -> #0x0204` 即 `AH=02`
+
+```assembly
+mov	ax,#0x0200+SETUPLEN	; service 2, nr of sectors
+int	0x13
+```
+
+对应在 `inter61a/INTERRUP.B` 找到如下描述，可知 `CF` 用来做错误位设置，clear 时标志成功，
+自然猜测接下来的 `jnc` 指令就是为了检查 READ SECTOR(S) INTO MEMORY 这一操作是否成功。
+
+```shell
+INT 13 - DISK - READ SECTOR(S) INTO MEMORY
+	AH = 02h
+	AL = number of sectors to read (must be nonzero)
+	CH = low eight bits of cylinder number
+	CL = sector number 1-63 (bits 0-5)
+	     high two bits of cylinder (bits 6-7, hard disk only)
+	DH = head number
+	DL = drive number (bit 7 set for hard disk)
+	ES:BX -> data buffer
+Return: CF set on error
+	    if AH = 11h (corrected ECC error), AL = burst length
+	CF clear if successful
+	AH = status (see #00234)
+	AL = number of sectors transferred (only valid if CF set for some
+	      BIOSes)
+Notes:	errors on a floppy may be due to the motor failing to spin up quickly
+	  enough; the read should be retried at least three times, resetting
+	  the disk with AH=00h between attempts
+	most BIOSes support "multitrack" reads, where the value in AL
+	  exceeds the number of sectors remaining on the track, in which
+	  case any additional sectors are read beginning at sector 1 on
+	  the following head in the same cylinder; the MSDOS CONFIG.SYS command
+	  MULTITRACK (or the Novell DOS DEBLOCK=) can be used to force DOS to
+	  split disk accesses which would wrap across a track boundary into two
+	  separate calls
+	the IBM AT BIOS and many other BIOSes use only the low four bits of
+	  DH (head number) since the WD-1003 controller which is the standard
+	  AT controller (and the controller that IDE emulates) only supports
+	  16 heads
+	AWARD AT BIOS and AMI 386sx BIOS have been extended to handle more
+	  than 1024 cylinders by placing bits 10 and 11 of the cylinder number
+	  into bits 6 and 7 of DH
+	under Windows95, a volume must be locked (see INT 21/AX=440Dh/CX=084Bh)
+	  in order to perform direct accesses such as INT 13h reads and writes
+	all versions of MS-DOS (including MS-DOS 7 [Windows 95]) have a bug
+	  which prevents booting on hard disks with 256 heads (FFh), so many
+	  modern BIOSes provide mappings with at most 255 (FEh) heads
+	some cache drivers flush their buffers when detecting that DOS is
+	  bypassed by directly issuing INT 13h from applications.  A dummy
+	  read can be used as one of several methods to force cache
+	  flushing for unknown caches (e.g. before rebooting).
+BUGS:	When reading from floppies, some AMI BIOSes (around 1990-1991) trash
+	  the byte following the data buffer, if it is not arranged to an even
+	  memory boundary.  A workaround is to either make the buffer word
+	  aligned (which may also help to speed up things), or to add a dummy
+	  byte after the buffer.
+	MS-DOS may leave interrupts disabled on return from this function.
+	Apparently some BIOSes or intercepting resident software have bugs
+	  that may destroy DX on return or not properly set the Carry flag.
+	  At least some Microsoft software frames calls to this function with
+	  PUSH DX, STC, INT 13h, STI, POP DX.
+	on the original IBM AT BIOS (1984/01/10) this function does not disable
+	  interrupts for harddisks (DL >= 80h).	 On these machines the MS-DOS/
+	  PC DOS IO.SYS/IBMBIO.COM installs a special filter to bypass the
+	  buggy code in the ROM (see CALL F000h:211Eh)
+SeeAlso: AH=03h,AH=0Ah,AH=06h"V10DISK.SYS",AH=21h"PS/1",AH=42h"IBM"
+SeeAlso: INT 21/AX=440Dh/CX=084Bh,INT 4D/AH=02h
+
+# ···
+
+```